ANMERKUNG:
Bevor Sie Arbeiten im Innern des Computers ausführen, lesen Sie zunächst die im Lieferumfang des
Computers enthaltenen Sicherheitshinweise und befolgen Sie die Anweisungen unter
Innern des
Computers. Nach der Arbeit an Komponenten im Innern des Computers befolgen Sie die Anweisungen unter
Nach der Arbeit an Komponenten im Innern des
Sicherheitsrichtlinien finden Sie auf der Website zur Einhaltung gesetzlicher Vorschriften unter www.dell.com/
regulatory_compliance.
Themen:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the battery.
2. Remove the
base
panel.
3. Follow the procedure from step 1 to step 3 in "Removing the
4. Remove the keyboard.
Procedure
1. Lift the latch and disconnect the touch-pad cable from the system board.
2. Lift the latch and disconnect the power-button cable from the system board.
3. Remove the screws that secure the palm-rest assembly to the computer base.
1. power-button cable
3. palm-rest assembly
24
Entfernen der Handballenstütze
Entfernen der Handballenstütze
Computers. Weitere Informationen zur bestmöglichen Einhaltung der
hard
drive".
2. screws (7)
4. touch-pad cable
Vor der Arbeit an Komponenten im
15