Connecting To Power; Record Videos - DASHCAM C2 Bedienungsanleitung

Connecting to Power

Connect the car charger and DashCam by using the
charging cable.
Plug the other end of the car charger to your vehicle's
cigarette lighter socket.
Once the car engine is started, DashCam will automatically
power on and start recording. Once the car engine is shut
down, DashCam automatically saves the recording and
turns off within 10 seconds.
06 English
Using Your DashCam
As a driver, you have full responsibility to drive safely and adhere
to all applicable traffic regulations.

Record Videos

When connected to a car charger, DashCam automatically
starts recording and a red dot flashes on the screen. The
current recording duration is displayed, and the current date
and time is displayed.
To enable / disable the audio recording, press
Protect the Current Recording
By default, DashCam uses a sensor to automatically detect
accidental collisions and protect the video file with duration
of 30 seconds, and is displayed. This indicates that those
recordings have been locked and will not be overwritten by new
video clips.
To protect the current recording manually, press
.
.
English 07