How It Works; How To Install - Goalzero Yeti Tank Montageanleitung

HOW IT WORKS

The Goal Zero Yeti Tank Expansion Battery integrates with a Goal Zero
Yeti Lithium Portable Power Station and Goal Zero Yeti Link Expansion
Module to increase your energy storage capacity. The Yeti Tank is a
chainable 100 Ah Lead-Acid Battery that adds an additional 1.2kWh to
your home energy storage system.
Goal Zero
Solar Panels
(Sold Separately)

HOW TO INSTALL

1. Properly install Goal Zero Yeti Link Expansion Module (sold
separately) into Goal Zero Yeti Lithium Power Station. [Refer to Link
User Guide for installation instructions.]
2. Once Link is installed, connect the female cable on the Tank to the
external battery connector on the Link.
3. If installing more than one, chain remaining Tanks by connecting male
to female cables on additional Tanks.
Master 8mm Input
for Yeti Link & Yeti Tank
Expansion Battery
FRONT OF YETI
4 4
Goal Zero Lithium Yeti and
Goal Zero Yeti Link Expansion Module
+
REQUIRED (sold separately)
Female Chaining Cable
External Battery
Connector
BACK OF YETI
Goal Zero Yeti Tank
Expansion Battery