DeLOCK 11367 Bedienungsanleitung Seite 2

English
Description
This KVM switch by Delock is a convenient solution for connecting two computers
with DisplayPort output to one DisplayPort monitor and / or one HDMI monitor. By
using the button or the remote control you can switch between both computers.
Additionally there is a DisplayPort and HDMI output for connection of two
monitors, of which only one can be active at a time. Furthermore, three USB
Type-A ports can be used to connect a mouse, keyboard, hard drive or USB
memory. The built-in USB headset feature allows you to use a headset and
microphone with both computers.
Specification
• Connectors:
Input:
2 x DisplayPort 20 pin female
2 x USB 2.0 Type-B female
1 x Sub-D 9 pin female
1 x DC 5 V power connector
1 x 3.5 mm 3 pin stereo jack female for optional IR-receiver
Output:
1 x DisplayPort 20 pin female
1 x HDMI-A 19 pin female
3 x USB 2.0 Type-A female
2 x 3.5 mm 3 pin stereo jack female
• 2 switch buttons with LED indicator for source (PC1, PC2) and sink (DisplayPort,
HDMI)
• Switching via button or infrared remote control
• DisplayPort 1.1a specification
• DisplayPort output:
Resolution up to 2560 x 1440 @ 60 Hz / 3840 x 2160 @ 30 Hz (depending on
the system and the connected hardware)
• HDMI / DP++ output:
Resolution up to 1920 x 1080 @ 60 Hz (depending on the system and the
connected hardware)
• DisplayPort output supports Dual Mode DP++
• Configuration and control of the device via RS-232 interface
• Robust metal housing
• Colour: black
• Dimensions (LxWxH): ca. 257 x 112 x 33 mm
• OS independent, no driver installation necessary
-2-