Plaque Removal Alarm Magnet - Gewiss GW 10 861 Anwenderhandbuch

To guarantee good system protection, the product generates a tamper-proof signal if the
front plaque is removed.
The presence of the plate is checked by means of a tamper-proof magnet.
To make it function, you must assemble the magnet on the plaque using the kit supplied
with the product. The kit contains:
•1 magnet;
•1 double-sided adhesive to fix the magnet to the plaque;
•1 fixing template;
Steps
1.Fix the template to the back of the plaque, ensuring the insertion position is correct
(for the LUX plaque, you must also check it is correctly orientated in relation to the
GEWISS mark on the front frame);
2.Insert and fix the double-sided adhesive to the plaque, using the template cut-out as
a reference;
3.Fix the magnet to the double-sided adhesive (be sure to centre it in relation to the
arrows next to the cut-out)
4.Remove the fixing template;
5.Assemble the plaque on the product, respecting the correct position;
Second shaped hole, only on LUX plaques
If the magnet is not installed correctly, the sensor will send not only the presence
signal but also the magnet open one, thereby generating an alarm in the control unit.
USER INSTRUCTIONS

Plaque removal alarm magnet

2.
1.
3.
Magnet
Double-sided adhesive
Fixing template
(shaped hole to identify
the correct position)
30