Setting Up An Lpr Printer In Windows 2000/2000 Pro/2003/Xp - Spire Creo Color Server Anleitung

Step 5: Printing from a Macintosh or Windows Computer

Setting Up an LPR Printer in Windows 2000/2000 Pro/2003/XP

Select the following options:
10.
•
:
Protocol LPR
•
:
LPR Settings
•
Queue Name
which you want to print—for example,
•
LPR Byte Counting Enabled
Click , and then
11. OK Next
Click in the Printer Ports window.
12. Close
Click in the Printer Server Properties window.
13. Close
The next step is to setup the TCP/IP port for printing using the Adobe
Printer Driver.
Before you begin, make sure that LPR is installed on your on the
Windows 2000, 2000 Pro, XP and 2003 computer.
Installing LPR on Your Computer
Click and select
1. Start
(Windows 2000, 2000 Pro, XP and 2003).
Control Panel
Select
2. Add/Remove Windows Components
Locate the
3. Other Network and Print Services
•
If this check box is selected, proceed to Setting up an LPR Printer
on page 12.
•
If this check box is not selected, proceed to the next step 4.
Select the
4. Other Network and Print Services
.
Next
Click Browse and locate the desired Windows installation files, either
5.
on your hard disk, in the
CD.
Click .
6. Finish
: type the exact name of the network printer to
: selected.
.
Finish
Settings > Control Panel
.
folder, or on your Windows installation
I386
11
CX2601_ProcessPrint
(Windows XP) or
check box.
check box, and click