Westfalia WT 487 Bedienungsanleitung Seite 12

Insert one new lithium cell "CR2032" battery into the battery compartment by observing the "+"
3.
polarity facing upward.
4. Replace the battery cover and turn clockwise to lock it.
If AC power is interrupted and backup batteries are being used, the time and all settings of your unit
will be kept. The alarm, radio, mood light and wireless charging do not function and the time display
does not light up.
TO USE THE WIRELESS CHARGER
This function only works with mobile devices that support Qi technology.
1. Make sure your clock radio is connected with the adaptor (5V-2.5A) supplied with this clock radio.
Unauthorized chargers or adaptors may cause damage or the wireless charger may
malfunction.
2. Center your mobile device with back side down on the marked charging target circle. The
wireless charging indicator is on.
3. If your mobile device is not charging, the charging indicator is off. Please verify that your mobile
device is not shifted too far off center.
4. Using the external wireless charging receiver connected to non-Qi compatible mobile device may
result in unstable charging.
5. Do not put any foreign object (metal) on the charging target circle any time or under the mobile
device during charging. The wireless charging indicator flashes and charging will stop.
Note: the wireless charging indicator light alerts you to the wireless chargers status:
Charging
indicator
Light is on, mobile device is
charging properly.
Make sure your device is
aligned to this units charging
area. Center your device with
back side down on the marked
charging target circle.
Light is off, if:
1 – your mobile device is
removed from the wireless
charging surface
2 – your mobile device is not
placed on the charging surface
properly
3 – the radio clock is not
connected to a power outlet.
Please verify that your mobile
device is not shifted too far off
centre.
Status
EN3
Mobile
device
position
Charging target circle
Top view
Mobile devices