Pairing To The Mobile Phone; Playing The Music - i-PHONO BT420 Handbuch

Please follow the below instruction to pair the headphone with a Bluetooth mobile phone:
1. Press and hold the pairing Button for 2-3 sec until the headphone LED starts to flash with blue and
red.
2. Release the pairing button after the LED is flashing, the status indicates that the headphone is in
pairing mode and waiting to pair with another Bluetooth device.
3. Follow the operating instructions for your Bluetooth phone to start a pairing process.
4. The phone's display will indicate that it found one or more Bluetooth devices, the "i-PHONO"
should be included in the list, please select it for pairing.
5. The phone's display then prompts you for a pairing passkey or PIN, Please enter four zero "0000".
6. When the pairing process is finished successfully, the headphone LED will return to normal status
of flashing blue only.
7. Your phone's display may ask you whether you want to change the headphone's name. You can
replace the "i-PHONO" with any you prefer.

Playing the music

Before playing the music, please ensure the headphone has already been paired with audio dongle
Plug the audio dongle's HiFi connecter into MP3 player, walkman or CD payer. Turn on the audio
dongle, headphone and music player. Play the music in music player side. And then you will hear the
music from headphone.
p.s. If you want to stop hearing the music from headphone, you can press the pairing button on audio dongle. And then
the audio dongle doesn't send any signals to headphone. Press the pairing button again to return the music.
English
- 7 -