MOB MO8827 Bedienungsanleitung Seite 3

Function:
1. 2.4G-2.4835G radio frequency technology.
2. 2.4G wireless radio frequency technology for smooth movement of cursor.
3. 800/1000/1200DPI modes.
4. Multi-level control of sleep and power mode whilst unconnected.
5. Low-power consumption, low-current design, to extend the life of the battery.
6. No codes required, simply plug and play.
7. MINI BUILT-IN portable receiver.
8. Ergonomic design.
Install Batteries:
1. Prepare 2 (AAA) batteries.
2. Open the battery cover on the bottom of mouse.
3. Insert the batteries with the correct polarity.
4. Close the battery cover, switch the on/off switch to ON position, then the mouse is ready to use.
Install receiver
1. For lap top use, please connect the USB receiver directly to the USB Port on the laptop.
2. For desk PC use, we suggest using a USB extension cable to connect the USB receiver.
3. This mouse adopts codeless technology, once the USB receiver is connected to the computer, the driver
will install automatically.
4. Make sure the on /off switch is ON before using the mouse.
Adjust movement of the mouse:
Press CPI (Counts Per Inch) switch to adjust the movement of mouse cursor on the screen.
Attention:
1. In order to extend battery life we suggest the mouse is used on a white or light coloured mouse pad. Switch
off the mouse when it is not in use.
2. We recommend the use of alkaline batteries,
3. When the mouse is in sleep mode simply press any key to reactivate.
4. Do not use the mouse on glass or smooth surfaces.
5. Please leave the receiver away from electrical appliances, such as speakers, monitor, TV etc. at least
20CM distance when using the mouse at greater distances.
Frequently Asked Questions & Answers
If mouse is not working?
1. Ensure the battery is installed correctly.
2. Ensure sure the USB port is well connected.
3. Ensure the battery has enough power.
When the mouse is not working smoothly
1. Place the USB receiver as far as possible from other electrical appliances.