Hyperion CL4P-TP Handbuch Seite 5

Gently place your unit on the ground in an upright position
•
with the tire down. Please hold steady without applying
pressure for 5 seconds. Your CL4P-TP Unit will stand upright
under its own power and is ready for operation.
• If your CL4P-TP Unit does not engage in an idle position but falls
over, please check that the unit is fully charged and powered ON
in the #1 (Run) position. Lift the CL4P-TP Unit up and tilt forward
or backward to engage the internal gyro. You will hear the gears
engage and the wheels will rotate. Repeat setting your CL4P-TP
Unit on the ground for operation.
Your unit will engage in a slight back and forth motion as the
•
gyro is setting.
CAUTION: DO NOT USE YOUR HAND TO TURN THE CL4P-TP UNIT'S
a.
WHEELS.
Please keep fingers and objects clear of the rotating wheels.
b.
On: (2) (Display Functions Only) 'On' allows your CL4P-TP Unit to
perform the following functions through your device's operational
App, without the engaging the motor. This position is recommended
for Display only usage.
Please note, the CL4P-TP Unit motor/gyro will not be engaged in this
position. The Unit will need the stand to stay upright.
• Eye will be solid blue (will turn red when specific audio clips are
played)
• Randomized audio sound clip playback
• Voice projection
PAIRING YOUR DEVICE AND UNIT
After downloading the Unit's App, you can start pairing the unit and
your device.
• Turn the CL4P-TP Unit to either "On" or "Run", depending on the
function you want to perform.
"Run" (1) – all functions and mobility.
•
"On" (2) – all functions except mobility.
•
Please see above in "Operation" for full details of each of these
positions.
• Enter the "Settings" menu for your mobile device
• Enter "Wi-Fi" menu
4