Celestron PowerTank 18763 Bedienungsanleitung Seite 5

MOUNTING
ATTACHING THE POWERTANK LITHIUM LT
TO YOUR TELESCOPE TRIPOD
PowerTank Lithium LT can be attached to your telescope's
tripod leg using the tripod leg strap. To use the strap:
1. Slip the strap through the two slots in the power pack's
tripod leg mount. The hook and loop fasteners on the
strap should be facing toward the power pack.
2. Wrap the strap around the tripod leg, then feed the end
of the strap through the buckle.
3. Pull the strap so it is tight against the tripod leg, and
secure the strap using its hook and loop fastener.
I
ENGLISH
5