Hama AC80 Bedienungsanleitung Seite 3

G Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions
and information completely. Please keep these
instructions in a safe place for future reference. If
you sell the device, please pass these operating
instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Note
This symbol is used to indicate additional
information or important notes.
2. Package Contents
• 'AC80' audio converter
• These operating instructions
3. Safety Notes
• The product is intended for private, non-commer-
cial use only.
• Protect the product from dirt, moisture and over-
heating, and only use it in a dry environment.
• Keep this product, as all electrical products, out of
the reach of children!
• Connect the product only to a socket that has
been approved for the device. The socket must be
installed close to the product and must be easily
accessible.
• Disconnect the product from the network using the
power button – if this is not available, unplug the
power cord from the socket.
• Do not attempt to service or repair the product
yourself. Leave any and all service work to quali ed
experts.
• Do not continue to operate the device if it
becomes visibly damaged.
2
4. Introduction
The audio converter is an ideal expansion for TVs,
home cinemas and game consoles. Frequently, these
devices do not have all of the connections that are
required. Most often, there is a digital audio output
for connecting to a surround sound system. However,
if you want to connect to a standard stereo system or
active speakers, the required connections are often
not available.
The audio converter lets you tap into the digital
sound output using the coaxial output or the optical
output. The device converts the digital sound and
then outputs it to an analogue stereo sound output
(2 x RCA).
The converter is suitable for digital sound signals at
sampling rates up to 96 kHz and resolutions up to
24 bits, and can thus be used in almost any
situation.
5. Getting started and operation
Before installation, ensure that all devices to be
connected are switched off.
• Connect a Toslink cable (not included) to the
'Toslink' audio input (1) or an RCA cable (not
included) to the 'Coaxial' audio input (2) and to
your playback device (for example, TV, Blu-ray
player, game console).
• Now connect another RCA cable (2 RCA – 2 RCA,
not included) to the 'R/L' audio output (5) and to
your audio device (for example, ampli er, active
speaker).
Note
The white RCA plug connects to the LEFT audio
output, the red RCA plug to the RIGHT audio
output.
• Connect the connecting cable of the power supply
unit to the 5V DC connection (4).
• Now connect the power supply unit to an easily
accessible outlet. The power LED (3) lights up red.