Newa Pond CST adv 2300 Gebrauchsanleitung Und Garantie Seite 5

INSTALLATION: The Cascata adv pump can operate in
or out of water (detailed Fig. 3 and 4, page 39). The
pump is equipped with two multistage threaded hose
connectors, which allow the pump to be connected to
hard pipes or flexible hoses of various diameters (Fig.
5 page 39).
CASCATA adv 4500-6000-8000: The impeller chamber
can be angled at 90° in order to use the pump as
required (Fig. 14 and 15 page 43). For this operation,
carefully read the assembly instructions and follow the
illustrations from page 42 to 48.
MAINTENANCE: Rotating parts need to be regularly
accessed for cleaning. To this purpose it is recommended
to not use any chemical detergents.
CST adv 2300/3000: follow the instructions on page 40.
Unfasten the screws, remove the impeller chamber, and
take out the rotor and proceed with cleaning.
CST adv 4500/6000: follow the instructions on page 42.
Unfasten the screws, remove the impeller chamber, and
take out the rotor and proceed with cleaning.
CST adv 8000: follow the instructions on page 42. After
having carefully positioned the pump on the rear cover,
remove the screws. Keep the impeller disc attached to
the pump motor unit, using one of the free eye bolts.
Remove the impeller chamber by pushing the outlet
pipe towards the work surface (Fig.8 page 42). Take out
the rotor with the impeller and proceed with cleaning.
Replace all parts in reverse order:
impeller chamber in its seating, ensuring that the bushing
is positioned correctly on the bottom of the well. When
re-inserting the rotor, pay attention to its magnetic power
in order to avoid any damage and injury to the fingers.
CST adv 4500-6000-8000: Turn the impeller disk,
paying attention to follow the reference marks placed
on the impeller and on motor body of
(Fig.13 page 42). Screw the impeller chamber back
onto the pump, choosing the required position.
CST adv 8000: Place the impeller chamber making
sure that the screw lodging is not next to the fastening
eyelets. Rotate it clock-wise until the stop, then insert
the screws and screw to fasten it (Fig.17 page 44).
Put the pump back into the shell, inserting it into the
special slides positioned inside. Close the pump with the
remaining shell and fasten the screws.
ATTENTION: The rotor is provided with a ceramic shaft,
that is wear-resistant, but fragile. Pay utmost attention
during maintenance operations.
TROUBLE-SHOUTING GUIDELINES
If there is insufficient water coming out of the pump:
• Check that the pump intake is clean and without any
obstructions
• Check that there are no kinks in the connected tubes
If the pump stops working:
• Check that the pump is correctly powered.
• Make sure that the water level is not too low. The intake
English
tube of the pump must be below the water level both on
submerged and external applications.
• Check that the rotor doesn't have any obstructions
CASCATA adv 2300-3000: the pump is provided with a
self-resetting thermal protector. If the pump stopped
working, please investigate if the thermal cut-off has
been activated by first disconnecting the appliance
from the electrical supply for approximately 1 hour,
then remedy the cause that made the appliance stop,
and reconnect to the socket again.
CASCATA adv 4500-6000-8000: the pump is provided
with an electronic device for rotation control and this
is also able to evaluate the functioning conditions.
If there is lack of water or blocked rotor the pump
recognizes the problem and stops. After 10 attempts
(CASCATA adv 8000: 5 attempts) to start again, in the
space of 1 minute, the pump turns off completely. In
this case unplug and remove the cause of the problem.
After re-connecting the pump,it will resume working.
GUARANTEE CONDITIONS
This appliance is guaranteed from defects in its materials
and workmanship for a period of 3 years from the date of
purchase. If the appliance should not work correctly as
from the purchase date, return it to your local retailer. The
appliance will be replaced without any additional charge.
To use the guarantee service, return the appliance and
attach the proof of purchase and a detailed reason for
re-introduce the
the claim. The appliance must be carefully packed and
protected from any damage during transport. The guarantee
does not cover damage due to impact or being dropped
after purchase. The guarantee is not valid if the product
is used incorrectly or if damage is caused by tampering
or negligence by the purchaser causing the loss of fish or
other animals, personal damage, loss of properties or other
the pump
damage that might arise. The guarantee is not valid for
components subject to wear and tear (see * pages 46-47).
CORRECT DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL & ELECTRONIC EQUIPMENT)
(Applicable in the European Union and other European
countries with separate collection systems). This marking
shown on the produci or its literature, indicates that it
should not be disposed with other household wastes at
the end of its working life. To prevent possible harm to
the environment or human health from uncontrolled waste
disposal, please separate this from other types of wastes
and recycle it responsibly to promote the sustainable reuse
of material resources. • Household users should contact
either the retailer where they purchased this product, or
their local government office, for details of where and how
they can take this item for environmentally safe recycling.
• Business users should contact their supplier and check
the terms and conditions of the purchase contract. This
product should not be mixed with other commercial wastes
for disposal.
5 / 48
2002/96/CE • EN50419