Conceptronic CNETCAM2 Schnellinstallationsanleitung Seite 26

ENGLISH
• Click on the 'Next' button to go to the 'IP Setting' page.
The following options can be set or changed:
- DHCP
- Static IP
- PPPoE
: Choose this option when the device is connected to a router
or gateway. This way the device will automatically get an IP
address from the router or gateway.
: If you are using static IP addresses in your network, choose
this option to configure the device with a static IP too. Make
sure you do not use an IP address that is already in use.
: If your internet connection requires a user name and
password to be entered, you need to choose this option and
enter the user name and password from your ISP (Internet
Service Provider).
26