Herunterladen Inhalt Inhalt Diese Seite drucken

AirLive WLA-5200AP Schnellstartanleitung Seite 8

Vorschau ausblenden Andere Handbücher für WLA-5200AP:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 10
Select 802.11a, b, or g mode
The AP is default to 802.11a mode, running in 5Ghz
spectrum. If you want to run it in 802.11b/g mode, you
need to change the settings. The AP can not run in both
802.11a and 802.11g mode simultaneously.
1.
Open your web browser and enter the AP's IP address.
2.
Select Mode, and choose which wireless mode you want
3.
for example, the default mode is AP mode and default band is 11a
(outdoor), you can click the setup button and choose the 11b,
11g,11a (indoor), or 11g+b mixed to change the 2.4Ghz or 5Ghz
band.
4.
Click on Apply chnages to finish the setting
802.11a Frequency Domain
Please check with your local authority about the
frequency range that you can use legally.
Please do not use the fequency range that is not allowed in
your country.
If you want to change the 802.11a chnnael ,please follow the steps below:
1.
the default Region is Europe , if you are not in this region, please
change the Region first.
2.
go to the Wireless mode, select the mode you want ,click the setup
button and choose the 11a (outdoor) or 11a (indoor)
3.
in the Channel Number field, you just can choose the 11a channel
you want
4.
click the "Apply Changes" and take the effect
Note: please refer the user's manual for detail settings.
802.11 a/b/g Wireless AP
WLA-5200AP
English
7
7

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis