Catch Light Plate; Wide Panel - Olympus FL-700WR Bedienungsanleitung

Bouncing the fl ash
You can soften the light from the fl ash by refl ecting it off the ceiling or walls.
• When you set ZOOM (fi ring angle) to A (auto), the fi ring angle for bounce fl ash
photography becomes the "Bounce zoom" setting. (P. 60)
Creating a catch light effect
If you use the catch light plate during bounce fl ash photography, you can create
refl ections in the eyes of human subjects. This gives subjects more dynamic
expressions.
1
Hold down the PUSH button and tilt the fl ash window upward by 90
degrees.
2
Pull out the wide panel.
• The catch light plate will come out with the wide panel.
3
Stow just the wide panel.
Increasing the fi ring angle (wide panel) Increasing the fi ring angle (wide panel)
Use the wide panel when you use a lens with a focal length of 12 mm (24 mm*)
or shorter. The fi ring angle will become 7 mm. The wide panel is also useful
when you want to diffuse light during shooting at distances shorter than 1 meter
(3.2 ft.), and so forth.
* Focal length for 135 fi lm (35 mm fi lm)
1
Pull out the wide panel and set it in front of
the fl ash window.
• The catch light plate will come out with the wide
panel.
• The setting for ZOOM (fi ring angle) follows the
"Wide panel" setting. (P. 60)
2
Stow just the catch light plate.
x Do not fl ip the wide panel upward.
48
EN

Catch light plate

Wide panel

Wide panel/
Catch light plate