Epson OT-WL02 Benutzerhandbuch Seite 5

Using the USB Extension Cable
1. Attach the included rubber cover to the connector of the USB extension
cable into which the wireless LAN unit will be inserted, to prevent the
unit from coming off.
2. Insert the wireless LAN unit into the connector of the cable.
CAUTION:
Adjust the position of the rubber cover so that a description of the
label on the back side of the wireless LAN unit is not covered.
3. Connect the USB extension cable to the USB connector of the printer.
If you want to fix the wireless LAN unit, cut the included affixing tape to fit
and put on the unit, and fix the unit in a place of good communication
environment.
Rubber cover
Wireless LAN unit
Affixing tape
5
USB extension cable