Presetting; Setting The Date And Time; Setting The Lcd Contrast; Choosing The Ringer Melody - Microcom Phonebuddy Classic Bedienungseinleitung

maual-Classic_ALL 14.2.2003 15:22

Setting the date and time

In standby mode, the unit can show the date and time to help
you keep your appointments. You need to set the date and
time so that the date and time when messages or calls are
received can be displayed correctly.
Phone Setup
Set Clock
• When set the date and time, you need to enter, two digits at
a time e.g. the month August, in the month field you need to en-
ter 8. If not, the entry number is invalid.
• The time is in 24h mode.
• The date and time will be automatically set when you receive
a first call to this unit. (FSK standard)

Setting the LCD contrast

There are 15 levels for you to choose.
Phone Setup
Contrast
nebo
Stránka 5
Open the menu
Select the menu item and confirm
Select the menu item and confirm
The current setting is displayed
Select the Month/Day/Hour/Minute field
Enter the month/day/hour/minutes
(e.g. 12:36 23/08, as shown)
Select to confirm
Select to cancel
Open the menu
Select the menu item and confirm
Select the menu item and confirm
The current setting is displayed
(e.g. Contrast: 10)
Select the level you desired
Select to confirm
Select to cancel

Choosing the ringer melody

You can choose the ringer melody
Open the menu
Select the menu item and confirm
Phone Setup
Select the menu item and confirm
Ring Tone
(in development)

Resetting the unit

After reset the unit, all the settings will be deleted.
Open the menu
Select the menu item and confirm
Phone Setup
Select the menu item and confirm,
Main Reset
LCD shows Reset now?
Press to confirm, and the LCD shows
Format... . When formating is ended
the display will return to standby mo-
de.

Presetting

5 5
5 5