Noise Level; Power Cord Connection - Sun Oracle Sun Blade X6275 M2 Sicherheits- Und Compliancehandbuch

Depending on the type of power switch your device has, one of the following symbols may be used:
On – Applies AC power to the system.
Off – Removes AC power from the system.
Standby – The On/Standby switch is in the standby position.
Modifications to Equipment
Do not make mechanical or electrical modifications to the equipment. Sun Microsystems is not responsible for
regulatory compliance of a modified Sun product.
Placement of a Sun Product
Caution – Do not block or cover the openings of your Sun product. Never place a Sun product near
a radiator or heat register. Failure to follow these guidelines can cause overheating and affect the
reliability of your Sun product.

Noise Level

Product: Sun Blade X6275 M2 Server Module
In compliance with the requirements defined in ISO 7779, the workplace-dependent noise level of this product is less
than 70 db (A).
SELV Compliance
Safety status of I/O connections comply to SELV requirements.

Power Cord Connection

Caution – Sun products are designed to work with power systems having a grounded neutral
(grounded return for DC-powered products). To reduce the risk of electric shock, do not plug Sun
products into any other type of power system. Contact your facilities manager or a qualified
electrician if you are not sure what type of power is supplied to your building.
Caution – Not all power cords have the same current ratings. Do not use the power cord provided
with your equipment for any other products or use. Household extension cords do not have overload
protection and are not meant for use with computer systems. Do not use household extension cords
with your Sun product.
Safety Agency Compliance Statements xiii