Univers by FTE U3500 Installationsanleitung Seite 23

Image 5
Image 6
ANTENNA SUPPLY
"Tuner power" option must be selected "On", to be able to feed 5
VDC through coaxial cable in the input connector of the receiver.
To get further information about feeding 5VDC through coaxial
cable, please look up the receiver's user manual.
CONFIGURATION OF THE RECEIVER (SERIES U5000):
To configure 5VDC feeding through coaxial cable to U3500
antenna, please follow next steps:
Access to "Antenna Power" option, inside "Installation" menu.
To do this, press the MENU button at the remote control and
choose the option Installation using VW keys and press OK.
Go to the field Antenna power and press OK (image 5).
Next screen will be shown in TV, where you can activate/deactivate
5 VDC power supply through coaxial cable (image 6).
Go to the option "5 V" using VW keys and press OK.
To get further information about feeding 5VDC through coaxial
cable, please look up the receiver's user manual.
9 9