Contents Systemübersicht: Ansicht von vorne, links, rechts, hinten und unten (Modell B) ................32 About this Concise User Guide ............1 Systemübersicht: Ansicht von vorne, links, rechts, hinten und unten System Startup ..................4 (Modell C) ..................33 System Map: Front View with LCD Panel Open (Model A) ...6 3.75G/HSPA-Modul ................34 System Map: Front View with LCD Panel Open (Models B &...
Seite 4
Contenidos Tastiera ....................89 Tasti funzione ..................90 Acerca de esta Guía del Usuario Concisa ........61 Descrizione del sistema: Vista anteriore, sinistra, destra, Guía rápida para empezar ...............64 posteriore e inferiore (Modello A) ..........91 Mapa del sistema: Vista frontal con panel LCD abierto Descrizione del sistema: Vista anteriore, sinistra, destra, (Modelo A) ..................66 posteriore e inferiore (Modello B) ..........92...
About this Concise User Guide This quick guide is a brief introduction to getting your system started. This is a supplement, and not a substitute for the expanded English language User’s Manual in Adobe Acrobat format on the Device Drivers & Utilities + User’s Manual disc supplied with your computer.
Instructions for Care and Operation Safety Information • Only use an AC/DC adapter approved for use with this computer. The computer is quite rugged, but it can be damaged. To pre- • Use only the power cord and batteries indicated in this manual. Do vent this, follow these suggestions: not dispose of batteries in a fire.
Seite 7
Polymer Battery Precautions Note the following information which is specific to polymer batteries only, and where applicable, this overrides the general battery precaution information. • Polymer batteries may experience a slight expansion or swelling, however this is part of the battery’s safety mechanism and is not a cause for concern.
System Startup 1. Remove all packing materials. 2. Place the computer on a stable surface. 3. Insert the battery and make sure it is locked in position. 4. Securely attach any peripherals you want to use with the computer (e.g. keyboard and mouse) to their ports. 5.
Seite 9
Model Differences This notebook series includes three different model types that mainly differ as indicated in the table below. Note that your model may appear slightly different from those pictured in this manual. Feature Model A Model B Model C Display Type 14.0”...
System Map: Front View with LCD Panel Open (Model A) Figure 2 Front View with LCD Panel Open (Model A) 1. PC Camera (Optional) Design I Design II 2. LCD 3. Power Button 14” (35.56cm) 14” (35.56cm) 4. Hot-Key Buttons (Design I Only) 5.
System Map: Front View with LCD Panel Open (Models B & C) 15.6” (39.62cm) 17.3” (43.94cm) Model C Model B Figure 3 Front View with LCD Panel Open (Models B & C) 1. PC Camera (Optional) Note that the Touch- 2.
LED Indicators The LED indicators on the computer display helpful infor- Icon Color Description mation about the current status of the computer. Icon Color Description Orange The AC/DC Adapter is Plugged In Green The Computer is On Blinking The Computer is in Sleep Mode Green Model A - Design l Models B &...
Hot-Key Buttons Keyboard (Model A - Design I Only) The keyboard (Model A) has a numeric keypad for easy The Hot-Key buttons give instant access to the default In- numeric data input. Pressing Fn + NumLk turns on/off ternet browser and e-mail program, and allow you to tog- the numeric keypad.
Function Keys The function keys (F1 - F12 etc.) will act as hot keys when pressed while the Fn key is held down. In addition to the basic function key combinations, visual indicators are available when the hot key driver is installed. Keys Function/Visual Indicators Keys...
Control Center Press the Fn + Esc key combination, or double-click the icon in the notification area of the taskbar to toggle the Control Center on/off. The Control Center gives quick access to frequently used controls, and enables you to quickly turn modules on/off.
Seite 16
Power Modes You can set a Power Mode by clicking the appropriate icon at the top of the Control Center. Each power mode will affect the power status of modules (e.g. WLAN, 3G or Camera), screen brightness, TouchPad power and Silent Mode. You can click a Control Center icon to set an overall power mode and then click individual icons in the Control Cen- ter to power on/off any modules etc.
Power Status The Power Status icon will show whether you are currently powered by the battery, or by the AC/DC adapter plugged in to a working power outlet. The power status bar will show the current battery charge state. Brightness The Brightness icon will show the current screen brightness level.
Display Switch Click the Display Switch button to access the menu (or use the + P key combination) and select the appropriate attached display mode. Time Zone Clicking the Time Zone button will access the Date and Time Windows control panel. Desktop Background Clicking the Desktop Background button will allow you to change the desktop background picture.
System Map: Front, Left, Right, Rear & Bottom Views (Model A) Front Left Right Bottom Rear Figure 6 - Front, Left, Right, Rear & Bottom Views (Model A) 1. LED Power Indicators 11. USB 2.0 Port Overheating USB 3.0 Port 2.
System Map: Front, Left, Right, Rear & Bottom Views (Model B) Front Left Right Rear Bottom Figure 7 - Front, Left, Right, Rear & Bottom Views (Model B) 1. LED Power Indicators 11. USB 2.0 Port Overheating USB 3.0 Port 2.
System Map: Front, Left, Right, Rear & Bottom Views (Model C) Front Left Right Rear Bottom Figure 8 - Front, Left, Right, Rear & Bottom Views (Model C) 1. LED Power Indicators 11. USB 2.0 Port Overheating USB 3.0 Port 2.
3.75G/HSPA Module (Models A & B Only) 3. Insert the USIM card as you would into your mobile phone. 4. Slide the SIMLOCK towards the hinge (in the direction to the If you have included an optional 3.75G/HSPA module in arrow illustrated in Figure 10) in order to release the lock and...
Driver Installation The Device Drivers & Utilities + User’s Manual disc contains the drivers and utilities necessary for the proper operation of the computer. This setup will probably have al- Driver Installation General Guidelines ready been done for you. If this is not the case, insert the disc and click Install Drivers (button), or Option Drivers (button) to access the Optional driver menu.
Troubleshooting Problem Possible Cause - Solution The Wireless LAN/ The modules are off. Check the LED indicator and/or function key indicator to see if the WLAN/ Bluetooth/3.75G/HSPA Bluetooth/3.75G/HSPA module is on or off (see Table 2 on page 8 Table 5 on page 10).
Seite 26
Storage Communication Model A: (Factory Option) One Changeable Built-In Gigabit Ethernet LAN 12.7mm(h) Optical Device Type Drive 14" (35.56cm) HD TFT LCD (Factory Option) 300K/1.3M Pixel USB PC (Super Multi Drive Module or Blu-Ray Camera Module Model B: Combo Drive Module) (Factory Option) 3.75G/HSPA Mini-Card 15.6"...
Seite 27
Card Reader Dimensions & Weight Embedded Multi-In-1 Card Reader Model A: MMC (MultiMedia Card) / RS MMC 340mm (w) * 238mm (d) * 13.9 - 31.8mm (h) SD (Secure Digital) / Mini SD / SDHC/ 2.2 kg (with 48.84WH Battery and ODD) SDXC MS (Memory Stick) / MS Pro / MS Duo 340mm (w) * 238mm (d) * 26.25 - 34.7mm...
Über das Ausführliche Benutzerhandbuch Diese Kurzanleitung soll einen Überblick über die Schritte geben, die dazu notwendig sind, das System zu starten. Dieses ist nur eine Ergänzung und kein Ersatz für das erweiterte englischsprachige Benutzerhandbuch, das auf der mitgelieferten Disc Device Drivers & Utilities + User's Manual im Adobe-Acrobat-Format vorliegt. Diese Disc enthält auch die Treiber und Utility-Programme, die für einen einwandfreien Betrieb des Computers notwendig sind (Hinweis: Das Unternehmen behält sich das Recht vor, diese Publikation ohne Vorankündigung zu überarbeiten und den Inhalt zu verändern).
Hinweise zu Pflege und Betrieb • Wenn der Computer heruntergefallen ist oder beschädigt wurde (berüh- ren Sie nicht die giftige Flüssigkeit des LCD-Bildschirms). Das Notebook ist zwar sehr stabil, kann aber dennoch be- • Wenn ein ungewöhnlicher Geruch, Hitze oder Rauch aus dem Computer schädigt werden.
Seite 31
Polymer Akku Sicherheitshinweise Beachten Sie die folgenden Hinweise, die sich speziell auf Polymer Akkus beziehen. Diese Hinweise haben zudem Vor- rang gegenüber den Allgemeinen Akku Sicherheitshinweisen. • Polymer Akkus können sich etwas ausdehnen oder anschwellen. Dies ist Teil des Sicherheitsmechanismus des Akkus und kein Anlass zur Sorge. •...
Schnellstart 1. Entfernen Sie das gesamte Verpackungsmaterial. 2. Legen Sie den Computer auf eine stabile Unterlage. 3. Setzen Sie den Akku ein, und stellen Sie sicher, dass sie fest sitzt. 4. Schließen Sie alle Peripheriegeräte, die Sie mit dem Computer verwenden wollen (z.
Seite 33
Modellunterschiede Diese Notebookserie umfasst drei verschiedene Modelltypen, die sich in Folgendem unterscheiden. Es ist möglich, dass das von Ihnen erworbene Modell von dem in diesem Benutzerhandbuch abgebildeten Modell abweicht. Funktion Modell A Modell B Modell C LCD-Typ 14,0” (35,56cm) HD 15,6”...
Systemübersicht: Ansicht von vorne mit geöffnetem LCD-Bildschirm (Modell A) Abb. 2 Ansicht von vorne mit geöffne- tem LCD-Bildschirm (Modell A) Design I 1. PC-Kamera (optional) Design II 2. LCD-Bildschirm 14” (35,56cm) 3. Netzschalter 14” (35,56cm) 4. Hot-Key-Tasten (nur Design I ) 5.
Systemübersicht: Ansicht von vorne mit geöffnetem LCD-Bildschirm (Modelle B & C) 15,6” (39,62cm) 17,3” (43,94cm) Modell C Modell B Abb. 3 - Ansicht von vorne mit geöffnetem LCD- Bildschirm (Modelle B & C) Beachten Sie, dass der 1. PC-Kamera (optional) Funktionsbereich 2.
LED-Anzeigen Die LED-Anzeigen auf dem Computer zeigen wichtige Symbol Farbe Beschreibung Informationen über den aktuellen Status des Computers. Symbol Farbe Beschreibung Orange Der AC/DC-Adapter ist angeschlossen Grün Der Computer ist angeschaltet Modelle B & C Modell A - Design l Lampe Das System ist im konfigurierten Ener- blinkt...
Hot-Key-Tasten Tastatur (Nur Modell A - Design I) Die Tastatur (Modell A) hat eine eingebettete Nummernta- Mit den Hot-Key-Tasten haben Sie einen direkten Zugriff statur für einfache Zahleneingabe. Durch Drükken auf Fn + Standard-Internetbrowser E-Mail- Num wird die Nummerntastatur ein- und ausgeschaltet. Zu- Standardprogramm, und Sie können mit nur einem schnellen sätzlich gibt es Funktionstasten, über die Sie direkt zwi- Tastendruck den Leise-Modus/das Wireless-LAN-Modul...
Funktionstasten Wenn die Funktionstasten (F1 - F12) gleichzeitig mit der Fn-Taste gedrückt werden, funktionieren sie wie Hotkeys. Neben den Tastenkombinationen für die Grundfunktionen gibt es visuelle Anzeigen, wenn der Hotkey Treiber installiert ist. Tasten Funktion/ Visuelle Anzeigen Tasten Funktion/ Visuelle Anzeigen LCD-Helligkeit ver- Fn + ~ Wiedergabe/Pause (in Audio /Videoprogrammen)
Control Center (Steuerzentrum) Drücken Sie auf die Tastenkombination Fn + Esc, oder doppelklicken Sie auf das Symbol im Infobereich auf der Taskleis- te um das Control Center (Steuerzentrum) ein-/auszuschalten. Das Control Center (Steuerzentrum) bietet den schnellen Zu- griff auf häufig verwendete Funktionen, und Sie haben hier die Möglichkeit, Module direkt ein-/auszuschalten. Die WLAN- und Bluetooth-Module sind aus...
Seite 40
Energiemodi Sie können einen Energiemodus einstellen, indem Sie im Control Center auf das entsprechende Symbol klicken. Jeder Energiemodus wirkt sich auf den Stromstatus der Module (z. B. WLAN, 3G oder Kamera), die Bildschirmhelligkeit, die Stromversorgung des TouchPads und den Lautlos-Modus aus. Klicken Sie auf das Control Center-Symbol, um einen allgemein gültigen Energiemodus einzustellen.
Seite 41
Power Status (Energiestatus) Das Energiestatus-Symbol zeigt an, ob die Stromversorgung aktuell über den Akku oder über das an das Stromnetz ange- schlossene Netzteil erfolgt.Die Energiestatus-Anzeige zeigt den aktuellen Akkuladestatus an. Brightness (Helligkeits) Das Helligkeits-Symbol zeigt die aktuell eingestellte Bildschirmhelligkeit an.Sie können die Bildschirmhelligkeit entweder mit dem Schieberegler oder mit der Tastenkombination Fn + F8/F9 ändern.
Seite 42
Display Switch (Anzeige wechseln) Klicken Sie auf die Taste zum Wechseln des Anzeigegeräts, um das Menü aufzurufen (Sie können dazu auch die Tastenkombination + P verwenden), und wählen Sie einen Anzeigemodus aus. Time Zone (Zeitzone) Wenn Sie auf die Schaltfläche Zeitzone klicken, wird das Windows-Systemsteuerungsfenster Datum und Uhrzeit aufgerufen. Desktop Background (Desktop-Hintergrund) Wenn Sie auf die Schaltfläche Desktop-Hintergrund klicken, können Sie das Bild für den Desktophintergrund einstellen.
Systemübersicht: Ansicht von vorne, links, rechts, hinten und unten (Modell A) Vorderseite Linke Seite Rechte Seite Unterseite Hinterseite Abb. 6 Ansicht von vorne, links, rechts, hinten und unten (Modell A) 1. LED-Stromanzeigen 10. Kopfhörer-Ausgangsbuchse Überhitzung 2. DC-Eingangsbuchse 11. USB 2.0 Anschluss Zum Schutz vor Überhitzung Ihres Compu- 3.
Systemübersicht: Ansicht von vorne, links, rechts, hinten und unten (Modell B) Vorderseite Linke Seite Rechte Seite Hinterseite Unterseite Abb. 7 Ansicht von vorne, links, rechts, hinten und unten (Modell B) 1. LED-Stromanzeigen 11. USB 2.0 Anschluss 2. DC-Eingangsbuchse 12. Schacht für optisches Laufwerk Disc-Notauswurf 13.
Systemübersicht: Ansicht von vorne, links, rechts, hinten und unten (Modell C) Vorderseite Linke Seite Rechte Seite Hinterseite Unterseite Abb. 8 - Ansicht von vorne, links, rechts, hinten und unten (Modell C) 1. LED-Stromanzeigen 11. USB 2.0 Anschluss 2. DC-Eingangsbuchse 12.
3.75G/HSPA-Modul 3. Setzen Sie die USIM-Karte wie bei Ihrem Mobiltelefon ein. 4. Schieben Sie den SIMLOCK-Riegel in Richtung Scharnier (in die (Nur Modelle A & B) Richtung des in Abb. 10 dargestellten Pfeils), um den Riegel zu Wenn Ihr Modell das optionale 3.75G/HSPA-Modul ent- öffnen, und klappen Sie ihn hoch.
Installation der Treiber Die Disc Device Drivers & Utilities + User's Manual enthält die Treiber und Hilfspro- gramme, die für das einwandfreie Funktionieren des Computers notwendig sind. Mög- Allgemeine Hinweise zur licherweise wurden diese bereits vorinstalliert. Ist das nicht der Fall, legen Sie die Disc ein, Treiberinstallation und klicken Sie auf Install Drivers (Schaltfläche) oder Option Drivers (Schaltfläche), Wenn Sie keine fortgeschrit-...
Fehlerbehebung Problem Mögliche Ursache - Lösung Die Module Wireless-LAN/ Das/Die Modul(e) ist/sind ausgeschaltet. Prüfen Sie anhand der LED-Anzeige und/oder Bluetooth/3.75G/HSPA können Funktionstastenanzeige, ob das WLAN/Bluetooth/3.75G/HSPA-Modul ein- oder ausgeschaltet ist (siehe nicht erkannt werden. Tabelle 2 auf Seite 28 Tabelle 5 auf Seite 30).
Seite 50
Speicher Kommunikation Modell A: (Werkseitige Option) Ein austauschbares 1 Gbit Ethernet-LAN eingebaut optisches Laufwerk (12,7mm Höhe) (Super 14" (35,56cm) HD TFT LCD (Werkseitige Option) 300K/1,3M Pixel USB Multi-Laufwekrsmodul oder kombiniertes PC-Kamera-Modul Modell B: Blu-Ray-Laufwerksmodul) (Werkseitige Option) 3.75G/HSPA Mini- 15,6" (39,62cm) HD/ HD+/ FHD TFT LCD Eine Austauschbare SATA-2,5"-Festplatte Card-Modul (Nur Modelle A &...
Seite 51
Kartenleser Abmessungen und Gewicht Modell C: 413 (B) x 270 (T) x 14 - 40,5 (H) mm Festes Multi-in-1 Kartenleser-Modul Modell A: 2,9kg (mit 48,84WH-Akku und optischem MMC (MultiMedia Card) / RS MMC 340 (B) x 238 (T) x 13,9 - 31,8 (H) mm Laufwerk) SD (Secure Digital) / Mini SD / SDHC/ 2,2 kg (mit 48,84WH-Akku und optischem...
A propos de ce Guide Utilisateur Concis Ce guide rapide est une brève introduction à la mise en route de votre système. l s’agit d’un supplément, et non pas d’une alternative au Manuel de l’Utilisateur en Anglais complet au format Adobe Acrobat sur le disque Device Drivers & Utilities + User's Manual fourni avec votre ordinateur.
Instructions d’entretien et d’utilisation LCD est cassé, ne touchez pas le liquide car il contient du poison). • Si une odeur inhabituel, de la chaleur ou de la fumée apparaissait sor- L’ordinateur est robuste, mais il peut toutefois être endomma- tant de votre ordinateur.
Seite 55
Précautions concernant les batteries polymères Notez les informations suivantes spécifiques aux batteries po- lymères, et le cas échéant, celles-ci remplacent les informa- tions générales de précaution sur les batteries. • Les batteries polymères peuvent présenter une légère dilatation ou gonflement, mais cela est inhérent au mécanisme de sécurité de la batterie et ne représente pas une anomalie.
Guide de démarrage rapide 1. Enlevez tous les memballages. 2. Posez l’ordinateur sur une surface stable. 3. I nstallez la batterie et assurez-vous qu’elle correctement posi- tionnée. 4. Connectez fermement les périphériques que vous souhaitez uti- liser avec votre ordinateur (par ex. clavier et souris) à leurs ports respectifs.
Seite 57
Différences de modèles Cette série d’ordinateurs portables inclut trois types de modèles dont les différences sont indiquées dans le tableau ci-dessous. Remarquez que l’apparence de votre modèle peut être légèrement différente de celles présentées dans ce manuel. Caractéristique Modèle A Modèle B Modèle C Type de LCD...
Carte du système: Vue de face avec l’écran LCD ouvert (Modèle A) Figure 2 Vue de face avec l’écran LCD ouvert (Modèle A) 1. Caméra PC (optionnelle) Design I Design II 2. Écran LCD 3. Bouton d'alimentation 14” (35,56cm) 4. Boutons Hot-Key (Design I 14”...
Carte du système: Vue de face avec l’écran LCD ouvert (Modèles B & C) 15,6” (39,62cm) 17,3” (43,94cm) Modèle B Modèle C Figure 3 - Vue de face avec l’écran LCD ouvert (Modèles B & C) 1. Caméra PC (optionnelle) Remarquez que la zone d’uti- 2.
Indicateurs LED Les indicateurs LED sur votre ordinateur affichent des infor- Icône Couleur Description mations utiles sur l’état actuel de votre ordinateur. Icône Couleur Description Orange L'adaptateur AC/DC est branchée Modèles B & C Vert L’ordinateur est allumé Modèle A - Design l Vert Le système est dans le mode de clignotant...
Boutons Hot-Key Clavier (Modèle A - Design I seulement) Le clavier (Modèle A) est doté d'un pavé numérique intégré Les boutons Hot-Key donnent un accès instantané au naviga- pour une saisie des données numériques plus facile. Le fait teur Internet par défaut et au programme de messagerie, et d'appuyer sur Fn + Verr Num active ou désactive le pavé...
Touches fonction Les touches de fonctions (F1 - F12 etc.) agiront comme touches de raccourci (hot-key) quand pressée en maintenant la touche Fn appuyée. En plus des combinaisons des touches de fonction de base, les indicateurs visuels sont disponibles quand le pilote de touches de raccourci (HotKey Driver) est installé.
Control Center (Centre de contrôle) Appuyez sur la combinaison de touches Fn + Echap ou double-cliquez sur l'icône dans la zone de notification de la barre des tâches pour activer/désactiver le Control Center (Centre de contrôle). Le Control Center (Centre de contrôle) donne un accès rapide aux commandes fréquemment utilisées, et vous permet de rapidement d'activer/désactiver des modules.
Modes d’alimentation Vous pouvez définir un Mode d’alimentation en cliquant sur l'icône appropriée au dessus du Control Center (Centre de contrôle). Chaque mode d'alimentation aura une incidence sur l’état d’alimentation des modules (par exemple WLAN, 3G ou caméra), la luminosité de l'écran, le TouchPad et le Mode Silencieux. Vous pouvez cliquer sur l’icône du Control Center (Centre de contrôle) pour définir un mode d'alimentation générale, puis cliquer sur les icônes individuelles dans le Control Center (Centre de contrôle) pour activer/désactiver des modules etc.
Power Status (Etat d'alimentation) L'icône Etat d'alimentation indique si vous êtes actuellement alimenté par la batterie, ou par l'adaptateur CA/CC branché à une prise de courant. La barre d’état d’alimentation indiquera l'état de charge actuel de la batterie. Brightness (Luminosité) L'icône Luminosité...
Seite 66
Display Switch (Permutation d’affichage) Cliquez sur le bouton Permutation d’affichage pour accéder au menu (ou utilisez la combinaison de touches + P) et sé- lectionnez le mode d'affichage joint approprié. Time Zone (Fuseau horaire) Cliquer sur le bouton Fuseau horaire permet d’accéder au panneau de configuration de Date et heure de Windows. Desktop Background (Fond d'écran du bureau) Cliquer sur le bouton Fond d'écran du bureau vous permettra de changer l'image du fond d'écran du bureau.
Carte du système: Vues de face, gauche, droite, arrière & dessous (Modèle A) Face Gauche Droit Dessous Arrière Figure 6 Vues de face, gauche, droite, arrière & dessous (Modèle A) 1. Indicateurs d’alimentation LED 11. Port USB 2.0 Surchauffe 2.
Carte du système: Vues de face, gauche, droite, arrière & dessous (Modèle B) Face Gauche Droit Dessous Arrière Figure 7 Vues de face, gauche, droite, arrière & dessous (Modèle B) 1. Indicateurs d’alimentation LED 11. Port USB 2.0 2. Prise d’entrée DC 12.
Carte du système: Vues de face, gauche, droite, arrière & dessous (Modèle C) Face Gauche Droit Arrière Dessous Figure 8 Vues de face, gauche, droite, arrière & dessous (Modèle C) 1. Indicateurs d’alimentation LED 10. Prise de sortie haut-parleurs/casque Port USB 3.0 2.
Module 3.75G/HSPA 3. Insérez la carte USIM comme vous le feriez dans votre télé- phone mobile. Modèles A & B seulement 4. Faites coulisser le SIMLOCK vers la charnière (dans la direction Si votre option d'achat comporte un module 3.75G/HSPA à...
Installation du pilote Le disque Device Drivers & Utilities + User’s Manual contient les pilotes et les utilitaires nécessaires pour un bon fonctionnement de votre ordinateur. Cette installation aura proba- Directives générales pour blement déjà été faite pour vous. Si ce n'est pas le cas, insérez le disque et cliquez sur Ins- l'installation du pilote tall Drivers (bouton), ou Option Drivers (bouton) pour accéder au menu des pilotes D'une manière générale, sui-...
Dépannage Problème Cause possible - résolution Les modules LAN sans fil/ Le(s) module(s) est (sont) désactivé(s). Vérifiez l'indicateur LED et/ou l’indicateur de la touche Bluetooth/3.75G/HSPA ne peuvent de fonction pour voir si le module WLAN/Bluetooth/3.75G/HSPA est activé ou désactivé (voir pas être détectés.
Seite 74
Stockage de données Communication Modèle A: (Option d’usine) Un module de lecteur 1Gbit réseau Ethernet intégré optique échangeable (module de lecteur (Option d’usine) 300K/1,3M pixel caméra 14" (35,56cm) HD TFT LCD Super Multi ou module de lecteur combo PC USB Modèle B: Blu-Ray) (Option d’usine) Module Mini-carte 3.75G/...
Seite 75
Lecteur de carte Dimensions physiques & Poids Modèle C: 413 (l) x 270 (p) x 14 - 40,5 (h) mm Lecteur de carte multi-en-1 Modèle A: 2,9kg (avec batterie 48,84WH & lecteur MMC (MultiMedia Card) / RS MMC 340 (l) x 238 (p) x 13,9 - 31,8 (h) mm optique) SD (Secure Digital)/ Mini SD/ SDHC/ SDXC 2,2kg (avec batterie 48,84WH &...
Acerca de esta Guía del Usuario Concisa Esta guía rápida es una breve introducción para poner su sistema en funcionamiento. Es un suplemento y no un sustituto del Manual del usuario completo en inglés en formato Adobe Acrobat del disco Device Drivers & Utilities + User's Manual suministrado con el ordenador.
Instrucciones para el cuidado y funcio- • Si hay un olor fuera de lo normal, calor o humo que sale del orde- nador. namiento Información de seguridad El ordenador portátil es muy robusto, pero puede dañarse. Para • Utilice solamente un adaptador de alimentación aprobado para su evitar esto, siga estas sugerencias: uso con este ordenador.
Seite 79
Precauciones para baterías de polímero Tenga en cuenta la información siguiente específica para bate- rías de polímero; además, donde corresponda, invalida la infor- mación sobre precauciones para baterías normales. • Las baterías pueden aumentar o hincharse ligeramente, sin embargo, esto es parte del mecanismo de seguridad de la batería y o supone un problema.
Guía rápida para empezar 1. Quite todos los materiales del embalaje. 2. Coloque el ordenador en una superficie estable. 3. Inserte la batería y asegúrese de que quede bloqueada en su posición. 4. Conecte en los puertos correspondientes los periféricos que desee utilizar con el ordenador (p.
Seite 81
Diferencias de modelos Esta serie de portátil incluye tres tipos de modelos distintos que se diferencian según se indica en la siguiente tabla. Tenga en cuenta que el modelo puede parecer ligeramente distinto al de las imágenes en este manual. Característica Modelo A Modelo B...
Mapa del sistema: Vista frontal con panel LCD abierto (Modelo A) Figura 2 Vista frontal con panel LCD abierto (Modelo A) 1. Cámara PC (opcional) Diseño I Diseño II 2. Panel LCD 3. Botón de encendido 14” (35,56cm) 4. Botones Hot-Key (sólo 14”...
Mapa del sistema: Vista frontal con panel LCD abierto (Modelos B & C) 15,6” (39,62cm) 17,3” (43,94cm) Modelo B Modelo C Figura 3 - Vista frontal con panel LCD abierto (Modelos B & C) 1. Cámara PC (opcional) Tenga en cuenta que el área válida operación 2.
Indicadores LED Los indicadores LED en su ordenador muestran una valiosa Icono Color Descripción información sobre el estado actual del ordenador. Icono Color Descripción Naranja El adaptador AC/DC está conectado Verde El ordenador está encendido Modelos B & C Modelo A - Diseño l Verde El ordenador está...
Botones Hot-Key Teclado (Sólo Modelo A - Diseño I) El teclado (Modelo A) tiene un teclado numérico para una Los botones Hot-Key ofrecen acceso instantáneo al entrada fácil de datos numéricos. Al presionar Fn + Bloq explorador de Internet y al programa de correo electrónico Num el teclado numérico se habilita o inhabilita.
Teclas de función Las teclas de función (F1 - F12 etc.) actuarán como teclas directas (Hot-Key) cuando se pulsan junto con la tecla Fn. Además de las combinaciones de teclas de función básicas los indicadores visuales están disponibles cuando el controlador de teclas directas está...
Control Center (Centro de control) Presione la combinación de teclas Fn + Esc o haciendo doble clic en el icono en el área de notificación de la barra de tareas para activar o desactivar el Control Center (Centro de control). El Control Center (Centro de control) ofrece un acceso rápido a los controles usados con más frecuencia y le permite activar, y desactivar módulos rápidamente.
Seite 88
Modos de energía Puede ajustar el Modo de energía haciendo clic en el icono apropiado en la parte superior del Control Center (Centro de control). Cada modo de energía afecta al estado de energía de los módulos (es decir, WLAN, 3G o cámara), el brillo de la pantalla, la energía del TouchPad y el Modo silencioso.
Power Status (Estado de energía) El icono Estado de energía mostrará si la alimentación actual viene dada por la batería o por el adaptador AC/DC enchufado en una toma de corriente. La barra de estado de energía muestra el estado actual de la carga de la batería. Brightness (Brillo) El icono Brillo mostrará...
Seite 90
Time Zone (Zona horaria) Si hace clic en el botón Zona horaria accederá al panel de control Fecha y hora de Windows. Desktop Background (Fondo de pantalla) Si hace clic en el botón Fondo de pantalla podrá cambiar la imagen del fondo del escritorio. TouchPad/cámara PC/módulo LAN Wireless /módulo Bluetooth/módulo 3.75G Haga clic en cualquiera de estos botones para cambiar el estado de energía del TouchPad o módulo.
Mapa del sistema: Vistas frontal, izquierda, derecha, posterior e inferior (Modelo A) Parte frontal Lateral izquierdo Lateral derecho Cara inferior Parte posterior Figura 6 Vistas frontal, izquierda, derecha, posterior e inferior (Modelo A) 1. Indicadores LED de encendido 11. Puerto USB 2.0 Recalentamiento 2.
Mapa del sistema: Vistas frontal, izquierda, derecha, posterior e inferior (Modelo B) Parte frontal Lateral izquierdo Lateral derecho Cara inferior Parte posterior Figura 7 Vistas frontal, izquierda, derecha, posterior e inferior (Modelo B) 1. Indicadores LED de encendido 11. Puerto USB 2.0 2.
Mapa del sistema: Vistas frontal, izquierda, derecha, posterior e inferior (Modelo C) Parte frontal Lateral izquierdo Lateral derecho Parte posterior Cara inferior Figura 8 - Vistas frontal, izquierda, derecha, posterior e inferior (Modelo C) 1. Indicadores LED de encendido 10. Conector de salida de auriculares ...
Módulo 3.75G/HSPA 4. Deslice SIMLOCK hacia la bisagra (en la dirección a la flecha (Sólo Modelos A & B) ilustrada en la Figura 10) para soltar el bloqueo y levantarlo. Si ha incluido un módulo opcional 3.75G/HSPA en su 5. Inserte la tarjeta USIM y cierre SIMLOCK. opción de compra, siga las instrucciones siguientes para instalar la tarjeta USIM (suministrada por su proveedor de servicios) y luego instale la aplicación.
Instalación de controladores El disco Device Drivers & Utilities + User’s Manual contiene los controladores y utilitarios necesarios para utilizar el ordenador correctamente. Inserte el disco y haga clic Directrices generales para la en Install Drivers (botón), u Option Drivers (botón) para acceder al menú de instalación del controlador controladores opcional.
Solución de problemas Problema Posible causa - Solución Los módulos WLAN, Bluetooth y El (Los) módulo(s) está(n) desactivado(s). Compruebe el indicador LED y/o el indicador de la tecla 3.75G/HSPA no pueden de función para ver si el módulo WLAN/Bluetooth/3.75G/HSPA está apagado o encendido (vea detectarse.
Especificaciones Opciones de procesadores Procesador Intel® Core™ i3 i3-2370M (2,40GHz), i3-2350M (2,30GHz), Procesador Intel® Core™ i7 i3-2330M (2,20GHz), i3-2310M (2,10GHz) i7-3612QM (2,10GHz) Caché de nivel 3 de 3MB, 32nm, DDR3- Caché de nivel 3 de 6MB, 22nm, DDR3- 1333MHz, TDP 35W Información actualizada de 1600MHz, TDP 35W especificaciones...
Seite 98
Dispositivos de almacenamiento Comunicaciones Modelo A: (Opción de fábrica) Una unidad de LAN Ethernet de 1Gbit incorporada dispositivo óptico de 12,7mm(h) (Opción de fábrica) Módulo cámara PC 14" (35,56cm) HD TFT LCD intercambiable (módulo unidad Super Multi/ USB de 300K/1,3M píxeles Modelo B: módulo unidad combo Blu-Ray) (Opción de fábrica) Módulo Mini-Card...
Seite 99
Lector de tarjetas Dimensiones y Peso Modelo C: 413 (a) x 270 (l) x 14 - 40,5 (h) mm Módulo lector de tarjetas multi-en-1 Modelo A: 2,9kgs (con batería de 48,84WH & unidad MMC (MultiMedia Card) / RS MMC 340 (a) x 238 (l) x 13,9 - 31,8 (h) mm óptica) SD (Secure Digital)/ Mini SD/ SDHC/ 2,2kgs (con batería de 48,84WH &...
Informazioni su questa guida rapida Questa guida rapida rappresenta un’introduzione rapida all’avvio del sistema. Si tratta di un supplemento e non di una sostituzione del Manuale per l'utente completo in lingua inglese nel formato Adobe Acrobat, memorizzato sul disco Device Drivers &...
Istruzioni per la custodia e il funziona- • Se c'è un odore non usuale, calore o fumo che fuoriesce dal compu- ter. mento Informazioni di sicurezza Il computer notebook è abbastanza rigido, ma è possibile che possa essere danneggiato. Per evitare qualsiasi danno, attenersi •...
Seite 103
Precauzioni relative alla batteria ai polimeri Le informazioni seguenti sono molto importanti e si riferiscono unicamente alle batterie ai polimeri e, ove applicabile, hanno priorità rispetto alle precauzioni generali relative alle batterie. • Le batterie ai polimeri possono espandersi o gonfiarsi leggermente, tuttavia questo fa parte del meccanismo di sicurezza della batteria e non deve essere causa di preoccupazione.
Guida di avvio rapido 1. Eliminare tutti i materiali di imballo. 2. Appoggiare il computer su una superficie stabile. 3. Inserire la batteria e verificare che sia bloccata in posizione. 4. Collegare bene le periferiche che si desidera usare con il computer (per esempio tastiera e mouse) alle porte corrispondenti.
Seite 105
Differenze dei modelli Questa serie di notebook comprende tre tipi di modelli differenti che variano tra loro per le caratteristiche indicate nella tabella seguente. Si noti che il proprio modello potrebbe essere leggermente diverso da quelli raffigurati nell'intero manuale. Funzionalità Modello A Modello B Modello C...
Descrizione del sistema: Vista anteriore con pannello LCD aperto (Modello A) Figura 2 Vista anteriore con pannello LCD aperto (Modello A) 1. Camera PC (opzionale) Design I Design II 2. Schermo LCD 3. Pulsante di alimentazione 14” (35,56cm) 14” (35,56cm) 4.
Descrizione del sistema: Vista anteriore con pannello LCD aperto (Modelli B & C) 15,6” (39,62cm) 17,3” (43,94cm) Modello C Modello B Figura 3 - Vista anteriore con pannello LCD aperto (Modelli B & C) 1. Camera PC (opzionale) Si noti che l'area operativa 2.
Indicatori LED Gli indicatori LED sul computer segnalano importanti Icona Colore Descrizione informazioni relative allo stato corrente del computer. Icona Colore Descrizione Arancione L'alimentatore è collegato Modelli B & C Verde Il computer è acceso Modello A - Design I Verde lam- Il computer è...
Pulsanti Hot-Key Tastiera (Solo Modello A - Design I) Nella tastiera (Modello A) è stato integrato un tastierino I pulsanti Hot-Key forniscono accesso immediato al browser numerico per un facile inserimento dei numeri. Premere Fn Internet predefinito e al programma di posta elettronica. + Bloc Num per commutare l’attivazione e la disattivazione Inoltre consentono di attivare/disattivare la Modalità...
Tasti funzione I tasti funzione (da F1 a F12) agiscono come Hot-Key quando premuti tenendo premuto il tasto Fn. In aggiunta alle combinazioni di tasti funzione base, quando è installato il driver hot key (HotKey Driver) sono disponibili gli indicatori visivi. Tasti Tasti funzione e indicatori visivi Tasti...
Control Center (Centro di controllo) Premere la combinazione di tasti Fn + Esc oppure fare doppio clic sull'icona nell'area di notifica della barra delle applicazioni per attivare/disattivare il Control Center (Centro di controllo). Il Control Center (Centro di controllo) consente di accedere rapidamente ai controlli utilizzati più...
Modalità risparmio energia È possibile impostare una Modalità risparmio energia facendo clic sull'icona corrispondente nella parte superiore del Control Center (Centro di controllo). Ciascuna modalità di risparmio energetico influenza lo stato di alimentazione di moduli (WLAN, 3G o camera), luminosità dello schermo, potenza del TouchPad e Modalità silenziosa. È possibile fare clic su un'icona del Control Center (Centro di controllo) per impostare una modalità...
Power Status (Stato di alimentazione) L'icona Stato di alimentazione viene visualizzata se attualmente il computer è alimentatore con la batteria, oppure mediante l'alimentatore collegato in una presa funzionante. La barra dello stato di alimentazione mostra la carica corrente della batteria. Brightness (Luminosità) L'icona Luminosità...
Seite 114
Display Switch (Switch visualizzazione) Fare clic sul pulsante Switch visualizzazione per accedere al menu (o utilizzare la combinazione di tasti + P) e selezionare la modalità di visualizzazione appropriata.. Time Zone (Fuso orario) Il pulsante Fuso orario consente di accedere al pannello di controllo di Windows Data e ora. Desktop Background (Sfondo del desktop) Il pulsante Sfondo del desktop consente di cambiare l'immagine sullo sfondo del desktop.
Descrizione del sistema: Vista anteriore, sinistra, destra, posteriore e inferiore (Modello A) Lato anteriore Lato sinistro Lato destro Parte inferiore Lato posteriore Figura 6 - Vista anteriore, sinistra, destra, posteriore e inferiore (Mo- dello A) 1. Indicatori LED alimentazione 11.
Descrizione del sistema: Vista anteriore, sinistra, destra, posteriore e inferiore (Modello B) Lato anteriore Lato sinistro Lato destro Lato posteriore Parte inferiore Figura 7 Vista anteriore, sinistra, destra, posteriore e inferiore (Modello B) 12. Bay unità ottica 1. Indicatori LED alimentazione Espulsione di emergenza del disco 2.
Descrizione del sistema: Vista anteriore, sinistra, destra, posteriore e inferiore (Modello C) Lato anteriore Lato sinistro Lato destro Lato posteriore Parte inferiore Figura 8 - Vista anteriore, sinistra, destra, posteriore e inferiore (Modello C) 1. Indicatori LED alimentazione 11. Porta USB 2.0 ...
Modulo 3.75G/HSPA 3. Inserire la carta USIM nel cellulare, come si farebbe per il proprio cellulare. (Solo Modelli A & B) 4. Far scorrere il BLOCCO DELLA SIM verso il perno (in direzione Se nell'opzione di acquisto è stato incluso un modulo 3.75G/ alla freccia raffigurata in Figura 10) per rilasciare il blocco e...
Installazione driver Il disco Device Drivers & Utilities + User’s Manual contiene i driver e le utilità necessari per il corretto funzionamento del computer. Inserire il disco e fare clic su Install Drivers Linee guida generali per (pulsante), oppure il pulsante Option Drivers per accedere al menu del driver opzionale. l'installazione dei driver Installare i driver attenendosi all'ordine indicato nella Figura...
Risoluzione dei problemi Problema Possibile causa - Soluzione Non è possibile rilevare i moduli LAN II/I modulo/i è/sono disattivato/i. Controllare il LED indicatore e/o l'indicatore del tasto funzione Wireless, Bluetooth e 3.75G/ per vedere se il modulo WLAN/Bluetooth/3.75G/HSPA è acceso o spento (vedere la Tabella 2 a HSPA.
Specifiche tecniche Opzioni di processore Processore Intel® Core™i3 i3-2370M (2,40GHz), i3-2350M (2,30GHz), Processore Intel® Core™i7 i3-2330M (2,20GHz), i3-2310M (2,10GHz) i7-3612QM (2,10GHz) Cache L3 da 3MB, 32nm, DDR3-1333MHz, Cache L3 da 6MB, 22nm, DDR3-1600MHz, TDP 35W Ultimi aggiornamenti delle TDP 35W specifiche tecniche Processore Intel®...
Seite 122
Periferiche di memorizzazione Comunicazione Modello A: (Opzione di fabbrica) Una unità di tipo LAN 1Gbit Ethernet ottico sostituibile da 12,7mm (altezza) (Opzione di fabbrica) Modulo di camera 14" (35,56cm) HD TFT LCD (modulo unità Super Multi/ modulo unità PC USB da 300K/1,3M pixel Modello B: combo Blu-Ray) (Opzione di fabbrica) Modulo 3.75G/HSPA...
Seite 123
Lettore di schede Dimensioni fisiche & Peso Modulo lettore di schede multi-in-1 Modello A: MMC (MultiMedia Card) / RS MMC 340 (B) x 238 (T) x 13,9 - 31,8 (H) mm SD (Secure Digital)/ Mini SD/ SDHC/ SDXC 2,2kg (con batteria 48,84WH & unità ottica) MS (Memory Stick) / MS Pro / MS Duo 340 (B) x 238 (T) x 26,25 - 34,7 (H) mm Alimentazione...