ACME DP-02 Bedienungsanleitung Seite 12

GB
2.3.8 DVB-T Signal Input
Refer to the picture and plug a TV Aerial to the ANT. / RF IN socket;
2.3.9 DVB-T Signal Output
The player can loop out the DVB-T signal to other TV receiver device.
(1) Make sure the player is connecting to power supply;
(2) Make sure a TV Aerial is connecting to the ANT. / RF IN socket;
(3) Refer to the picture and plug a TV cable to the ANT. / RF OUT socket then plug
the cable to a TV or other TV receiver.
12