Charge - Beeper Road RoadBoard SK1 Bedienungsanleitung

Charge

Here an operation to be made regularly on your
Put the connector of the charger
on the SK1. Connect the catch of
the charger on the sector 230V.
• Take care of well drying the product as well as the connector of refill before the connection of the charger.
• If the battery is completely empty, the SK1 stops brutally and you risk a fall.
• When the indicator with LED more qu ` a bar: You must reload your SK1 as soon as possible.
• The indicator with LED displays you the autonomy of the battery of the SK1.
• We advise you to reload the SK1 after each use.
• The duration of the refill is approximately 120 min. More the batteries are used, plus the duration of refill can lengthen.
• The autonomy of battery (on average 10 km for a new battery) varies according to the temperature. With -10° C.,
autonomy falls of half.
• The batteries have one life duration of 1,000 cycles, that is to say approximately 3 years with a daily refill.
• The batteries are replaceable, want to contact our engineering services where necessary.
Interior use. Not to expose to the rain.
T° of work: -10°C à 40°C / T° of storage: 10°C à 30°C
Please of read absolutely the present instructions and the advices before each use of the charger.
Precautions to be taken with the use of the charger of your
- The SK1 functions only with the adapter sector 230V - model SK1-SP01. The use of another adapter can damage the product.
- Adapter SK1-SP01 must be connected on a catch 230V domestic normal and easily accessible.
- Not to cover. Take care of a good ventilation.
- Not to pour liquid on the charger. Risk of electrocution.
- Do not use the charger near a sink, of a washing machine and in moist environment.
- Not to expose to heat or an excessive source of light.
- Not to pose another equipment on the charger.
- Not to leave the connected charger if you do not use it.
- Do not use the charger if it underwent a shock or an important fall or if it is damaged.
- Not to damage the cable. If the charger is damaged, do not dismount it, risk of electric shocks.
- The external flexible cable of this transformer cannot be replaced; in the event of damage of the cord, it is advisable to put the transformer
at the reject.
- Never not to connect and disconnect the connecting terminals from the battery as long as the electric cable is still connected to the sector. It
is always necessary to initially withdraw the card of the socket-outlet of the electric cable.
- Do not store your charger sector in basic zones temperature. When this one takes again its normal temperature, of moisture can be formed
inside the device and damage the electronic circuits.
- Disconnect the charger during the storms or during long periods of nonuse in order to avoid damaging it.
SK1 skateboard
The LED of
charger is red. Reload
SK1.
Double insulation Classifies II
Input: 110-240VAC - 50/60 Hz - 1A / Output: 29,4V
20
: to reload the batteries.
The LED of
charger is green.
You can roll!
Transformer of security
:
SK1
Indicator with LED
completely filled, it is
charged at 100%.
2000mA Max