Velleman VTBAL32 Bedienungsanleitung Seite 4

4. Features

selectable weighing units: kilogramme, gram, pound, fluid ounce

low-battery and overload indication

not calibrated: non-commercial use only

auto power-off

4-digit LCD display, red

tare function
5. Overview
Refer to the illustrations on page 2 of this manual.
1
weighing platform
2
UNIT button
6. Batteries
Warning: Do not puncture batteries or throw them in fire as they may explode. Do not
attempt to recharge non-rechargeable batteries (alkaline). Dispose of batteries in accordance
with local regulations. Keep batteries away from children.
1. Remove the plastic cover at the back of the scale.
2. Clean the contacts with a dry cloth. Insert two AAA batteries, making sure the positive (+) and
negative (-) symbols on the batteries match the symbols inside the battery compartment.
3. Replace the battery cover and close the battery compartment.
Remove the batteries if you are no longer using the device or if the device is left unused for an
extended period of time.
Remove used batteries promptly.
7. Operation
Place the scale on a flat and stable, non-slippery surface.
7.1 Switching On/Off
1. Press the ON/TARE button to switch on the scale. The scale is ready-for-use after a brief
initialization.
2. Press and hold the ON/TARE button to switch off the scale. The scale will automatically switch off
after 50 seconds of inactivity.
7.2 Unit Measures
Press the UNIT button to select the desired weighing unit. The scale will cycle between gram,
kilogramme, fluid ounces and pounds with every press.
7.3 How to Weigh
1. Switch on your scale and select the weighing unit.
2. Gently place the item to be weighed onto the platform and read the weight on the LCD display.
7.4 Using the Tare Function
1. Switch on your scale and select the weighing unit.
2. Gently place the container onto the platform and wait for the display to stabilise.
3. Briefly press the ON/TARE button. The display will set to zero.
4. You may now add the item to be weighed in the container and read the weight on the LCD display.
7.5 Indications
The display will show 'over' if you exceed the maximum allowed weight.
V. 02 – 05/07/2016
VTBAL32
3
LCD display
4
ON/TARE button
4 ©Velleman nv