Saving Program Into The Tbos-Ii Control Module; Customization Of Control Module(S) And Station(S) Names - Rain Bird TBOS-II Anleitung

7. Saving program into the TBOS-II
The TBOS-II Control Module has a backup memory for storing another program in addition to its current program.
TM
- Select " TBOS Backup " from the TBOS™ welcome menu and confirm by pressing OK.
The console can send a save instruction to the TBOS™, which will then make a copy
of its current program in its backup memory.
- Then choose "Save" if you wish to save your program in the internal memory of the control module.
Confirm by pressing OK.
- Choose "Manual recall". Upon receiving this instruction, the TBOS™ immediately replaces its current program
with the backup program.
- Choose "Automatic recall" if you wish to program the overwriting programs already saved in the control
module and replace them with new ones within the set-up lead time (between 1 and 90 days). Confirm by
pressing OK After the specified time period, the new program will be automatically transmitted by the TBOS™
to the control module.
NOTE: '0 days' will cancel the Automatic Recall.

Both the "saved" program and the "active" program are stored in the memory in case of a power failure.

8. Customization of Control Module(s) and Station(s) names

The different control modules and watering stations can be individually named for ease
the identification, and thus simpler programming system operation.
- Select "Names" from the TBOS™ IR welcome menu and confirm by pressing OK.
Control Module
TM
ENG
23