Care, Maintenance & Storage; Cleaning Your Machine - Bissell SPORTCLEAN PRO Handbuch

C
Care,
Maintenance & Storage

Cleaning your machine

1. Remove and rinse the tools in clean,
running water. Dry and replace in the tool
storage provided.
2. It is recommended that you suction clean
water from a bowl to rinse out the hose. Then
lift end of hose and stretch out to ensure all
water is cleared from hose.
3. Coil flex hose around the hose wrap and
secure with latch.
4. Check suction gate and if it appears dirty,
follow steps 1-4 in section C-2.
C-2 Cleaning suction gate
1. Remove dirty tank.
2. Remove two screws and pull off suction
gate door.
3. Wipe suction gate clean and rinse suction
gate door.
4. Replace suction gate door and two screws.
To reduce the risk of fire, electric shock, or
injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance
or troubleshooting.
www.BISSELL.com
7