Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis
Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 7
L2221
Rev. A
IMPORTANT RECEIVING INSTRUCTIONS
DESCRIPTION
27,60 (400)
22,08 (320)
16,56 (240)
11,04 (160)
5,52 (80)
0
3,28
(200)
FLOW: liter/minute (cu-in./minute)
SPECIFICATION
®
10/03
Visually inspect all components for shipping damage. If any shipping
damage is found, notify carrier at once. Shipping damage is NOT
covered by warranty. The carrier is responsible for all repair or
replacement costs resulting from damage in shipment.
These compact, in-line filters prevent chips and debris from entering the
hydraulic fluid system, protecting critical hydraulic system components
such as cylinders and valves from damage.
6,56
9,84
13,12
16,40
(400)
(600)
(800)
(1000)
= FL2101, FL2102 (10 MICRON)
= FL2201, FL2202 (20 MICRON)
:
Temperature Range
Viscosity Range:
Hydraulic Oil:
Maximum Pressure:
Ports:
Filtration:
Weight:
Instruction Sheet
Filters
FL2101, FL2102, FL2201, FL2202
41°-140°F [5°-60°C]
150-165 S.U.S [15-250 cSt]
HLP 23
5,000 psi [350 bar]
FL2101, FL2201 - #4 SAE .4375-20 thread
FL2102, FL2202 - G1/4 BSPP Thread
FL2101, FL2102 - 10 Micron Nominal, 25 Absolute
FL2201, FL2202 - 20 Micron Nominal, 40 Absolute
.5 lbs [.23 kg]
Inhaltsverzeichnis
loading

Inhaltszusammenfassung für Enerpac FL2101

  • Seite 7: Technische Daten

    Höchstdruck: 350 bar [5,000 psi] FL2101, FL2201 - Nr. 4 SAE 0.4375-20-Gewinde Öffnungen: FL2102, FL2202 - G1/4 BSPP-Gewinde FL2101, FL2102 - 10 Mikrometer nominell, 25 absolut Filtrieren: FL2201, FL2202 - 20 Mikrometer nominell, 40 absolut Gewicht: 0,23 kg [0.5 lbs]...
  • Seite 8: Sicherheitsinformationen

    Die Filter sollten stets zwischen der Spannvorrichtung- Kuppelstelle und etwaigen Ventilen plaziert werden. (Siehe Abbildungen 1 und 2.) Wenn Filter der Reihen FL2101 und FL2201 direkt in einer Nr. 4 SAE-Öffnung angebracht werden, das Fitting FZ-2005 verwenden. Wenn Filter der Reihen FL2102 und FL2202 direkt in einer 1/4 BSPP-Öffnung angebracht werden, das...
  • Seite 13 STRS-52 ACBS-202 FL2202 STRS-52 AH-652 AR-650 PED-2001 FL2202 AH-652 AR-650 ACBS-202 PED-2001 Figure 1 - Accumulator Shut-off Block Figure 1 - Bloc d'arrêt d'accumulateur Figura 1 - Bloque de corte de acumulador Abbildung 1 - Druckspeicher-Absperrblock Figura 1 - Blocco d’isolamento di un accumulatore Afbeelding 1 - Afsluitblok van accumulator (13)
  • Seite 14 Figura 2 - Bloque recibidor de acoplador automático Abbildung 2 - Auto-Kuppler-Aufnahmeblock Figura 2 - Blocco d’ingresso di un sistema di collegamento automatico Afbeelding 2 - Ontvangerblok van automatische koppeling FZ-2005 (FL2101) BFZ-2045 (FL2102) Figure 3 - PIN/PID Intensifiers Figure 3 - Multiplicateurs de pression PIN/PID Figura 3 - Intensificadores PIN/PID Abbildung 3 - PIN/PID-Verstärker...
  • Seite 15 (15)

Diese Anleitung auch für:

Fl2102Fl2201L2202

Inhaltsverzeichnis