RND lab RND 560-00215 Bedienungsanleitung Seite 2

Specification
Item No.
Voltage
Power
Temperature range
Temperature accuracy
Temperature stability
Heater
Heating indication
Display method
Temperature unit
Product Feature
Operational Guide
A . Switch function
Charge on the product,short press power button,When boo-
ting, the screen display the temperature, as shown in pic-
ture 1; when shutdown, the screen display OFF, as shown in
picture 2
B. 9 groups shortcut temperature adjustment
In the working state, press „+" „-" switch temperature group
(the default temperature value of 9 groups is:
°C
250 300 325 350 375 400 425 450 480
°F
482 572 617 662 707 752 797 842 896
RND 560- RND 560-
00215 00216
110 / 240 VAC
80 W 150 W
5set adjustment
+/- 10°C
+/- 2°C
Four core PTC heater
Blue LED
LCD
°C / °F
C. Setting Mode
(1) Quick temperature adjustment
While in the working state, press the power button to enter
the quick temperature adjustment, press the "+" „--" button to
adjust. Press fast adjustment, adjust the range: 250°C-480°C.
(2) Temperature compensation adjustment
In the fast temperature adjustment state, short press the
power button to enter the temperature compensation
setting, press „+" „-" adjust, long press to adjust quickly, the
adjustment range: + 50 °C / + 90 °F
(3) Temperature unit switching
In the temperature compensation adjustment state, short
press the power button to enter the unit setting, press "+" "-"
to switch C / F
(4) Auto-sleep function ON/OFF
In the temperature unit switching state, short press the po-
wer button to enter the sleep setting , press „+" „-" adjust, 1
means ON, 0 means OFF
D. Heating
Short press the power button to enter the normal state.
E. Warning
• When the product is heated. The power light flashes, the
brightness changes according to the power level, and the
selected gear light is long.
• When „H-E" displayed on the screen, there is no tempe ra tu-
re, which indicates that the heating element fails.
• When „S-E" displayed on the screen, there is a fault in sensor,
which signifies that there is something wrong in sensor or
the related circuit of the sensor.
www.rnd-electronics.com
EN