Clas Ohlson HD0010 Bedienungsanleitung

HDMI Repeater
Art. no 38-3481 Model HD0010
Please read the entire instruction manual before using the product and
save it for future reference. We reserve the right for any errors in text or
images and any necessary changes made to technical data. If you have
any questions regarding technical problems please contact
Customer Services.
Product description
The HDMI repeater eliminates cable loss and allows you to extend the
length of your HDMI cable.
The HDMI repeater is powered by the HDMI cable from your HDMI
source device.
The standby LED on the HDMI repeater comes on when the HDMI repeater
is supplied with power and the LINK LED comes on when the HDMI repeater
has established a connection between the HDMI devices.
The HDMI repeater has a 5 V DC input for an auxiliary power supply.
This input can be used in case the HDMI source device cannot supply
enough power to run the HDMI repeater.
A suitable adaptor for the auxiliary power supply is article number
18-2113 (GB) or 36-3310 (others).
Make sure you set any adaptor used to the correct voltage (5 V) and
polarity (centre-positive).
An adaptor is not included with this product as one is only required if
the standby LED does not come on when the repeater is connected to
the HDMI source device.
Disposal
Follow local ordinances when disposing of this product. If you are unsure
of how to dispose of this product, please contact your municipality.
GREAT BRITAIN • customer service
tel: 08545 300 9799 internet www.clasohlson.com/uk
e-mail customerservice@clasohlson.co.uk