Pause Cooking - ETNA KI560ZT Bedienungsanleitung

OPERATION
Checking remaining cooking time
The timer display shows the first finished timer setting.
An illuminated point next to the power level indicates that the cooking zone is
▷
linked to a timer.
1. Touch the slider from the cooking zone of which you want to adjust the timer.
The illuminated point next to the power level flashes.
▷
▷ The remaining cooking time is visible in the timer display.
Turning timer off
If you want to switch off the timer prior the end of preset time:
1. Touch the slider from the cooking zone of which you want to switch off the timer.
The illuminated point and the power level flashes.
▷
2. Touch simultaneously the plus '+' and minus '-' timer key.
The illuminated point next to the power level goes out.
▷
The timer display will show '--'.
▷

Pause cooking

1. Touch the pause key
A short acoustic signal will sound.
▷
The displays show the pause symbols. Pause cooking is activated.
▷
▷ In pause mode cooking timers are paused.
2. Touch the pause key again to stop the pause mode.
A short acoustic signal will sound.
▷
▷ The cooking zones resume previous selected power levels.
Cooking timers start countdown.
▷
All keys are inactive exept the On/Off key and the pause key.
▷
▷ Use the pause function to 'pause' the whole hob for max. 10 minutes while cooking.
After 10 minutes the hob will be switched off.
EN 17