Items Delivered; Appliance Description; Technical Data; Assembly Of The Appliance - Lentz 80024 Bedienungsanleitung

WARNING!
RISK OF INJURY!
•
Never mount the fan in a way that
it can fall in the tub or basin.
• Never take hold of an electric
appliance when it has fallen in the
water. In such a case, immediately
pull out the power plug.
• Never open the fan and never try
to access the inner side with metal
objects.
• Take care that the children do not
insert any objects in the fan.
• When you are not using the fan, or
cleaning it or if a fault occurs, always
switch it off and pull out the power
plug from the plug socket.
• The fan must not be operated
with an external timer or separate
tele-control system.

5. Items delivered

The following is included in the items
delivered:
1 Stand fun
operating manual

6. Appliance description

Image A:
1 Motor unit
2 Rail
3 Telescopic tube
4 Rail
5 Protective cap
6 Tube joint
7 Safety screw
8 Mounting nut
9 Locking nut
10 Rear safety grill
11 Rotor blade
12 Front safety grill

7. Technical Data

Model: FS-40
Nominal voltage: 220-240V, 50-60 HZ
Protection class: II
Nominal power: 60 Watt

Assembly of the appliance

1. Place the rail 2 on the rail 4, to form
a cross.
2. Place the telescopic tube 3 with its
mounting plate on the centre of the
cross and fix it with the four delivered
screws.
3. Release the tube joint 6 complete-
ly and put the covering cap 5 on
the tube in such a way that it covers
the mounting plate of the telescopic
tube.
4. Pull out the inner tube of the
telescopic tube completely and fix
again the pipe joint.
5. Put the motor unit1 on the upper
tube. Make sure that the motor unit
is inserted in the upper tube and
EN
15