Installation; Operation; Cleaning, Care & Maintenance; Troubleshooting - Buffalo GD867 Bedienungsanleitung

Installation

1. Remove all packaging from the appliance.
2. Position the base of the appliance in a suitable location.
3. Slot the top of the appliance onto the base.
4. Screw the top to the base using the screw supplied. The screw can be inserted into any of the
holes so that the height of the appliance can be adjusted.
Note: Ensure that all packaging has been removed from around the lamp.

Operation

1. Turn the appliance On/Off using the power switch on the stem of the appliance.
Note: The appliance only maintains temperature, it does NOT continue to
cook food.
Cleaning, Care & Maintenance
• A BUFFALO dealer or qualified technician should carry out repairs if required.
• Always switch off the appliance, disconnect the power supply and allow to cool before cleaning or
performing maintenance.

Troubleshooting

If your BUFFALO appliance develops a fault, please check the following table before making a call to
the Helpline.
Fault
The appliance is not working
Probable Cause
The appliance is not switched on
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Lamp expired
Action
Check the appliance is plugged in correctly
and switched on
Call BUFFALO agent or qualified technician
Replace the plug fuse
Check power supply
Replace lamp, part number AE307.
UK
5