Change The Boot Order Of The Drives From Bios; Laptop Installation; Install Migration Tool; Migrate Your Data - KLEVV M.2 SSD Installationsanleitung

Change the Boot Order of the Drives from BIOS

1. Power on your computer.(You may also see a message prompting
you to update your system's con guration settings. Refer to your
owner's manual for instructions.)
2.
While the computer is booting, press a special key such as ESC, F1,
or DELETE to enter the BIOS menu. Check your computer manufacturer's
documentation for the correct key(s).
Go to the Boot or Startup screen and change the boot order so that
3.
the KLEVV M.2 SSD appears before your old storage device.
Save the settings and exit the BIOS setup menu.
4.
Restart the computer.
5.
Now your computer boots to your KLEVV M.2 SSD.
6.

Laptop Installation

Install Migration Tool - Acronis True Image 2015
* Please skip this step if you don't need to migrate your data.
1. If your KLEVV SSD provides Migration Tool (Acronis True Image 2015),
Please download the software and its user's manual from the following
KLEVV website. (www.essencore.com or www.klevv.com)
* You may also use your own software for the data migration.
2. Follow the instructions to install the Migration Tool to your laptop.

Migrate Your Data

1. Please make sure that you have installed the Migration Tool.
2. Install the KLEVV M.2 SSD to the USB to M.2 2280 adaptor.
(You may need to consult the usermanual of your USB to
M.2 2280 adaptor)
3. Connect the KLEVV M.2 SSD to your desktop using the USB to
M.2 2280 adaptor
4. Run the Migration Tool,
and follow
the instructions to
migrate your
operating system
and data to the
new KLEVV M.2 SSD.
5. Safely remove your KLEVV M.2 SSD from USB when done.
6. Disconnect your KLEVV M.2 SSD from the USB to M.2 2280 adaptor.