ACR Y1-03-0352 A Benutzerhandbuch Seite 3

LIGHT OPERATION & BATTERY LIFE
Sleep mode - Only for storage.
Sleep mode will deactivate water activation mode.
1. From OFF press and hold the button for 10 seconds.
2. After 10 seconds the bi-color LED will flash red 3 times.
Press the button to reactivate water activation mode.
LIGHT OPERATION
CHANGE MODE
SLEEP MODE (deactivate water activation mode, ONLY for storage)
MODE
HIGH
MEDIUM
LOW
STROBE
STANDBY WITH water activation mode ACTIVE
WARNING & WARRANTY
Exposure Lights are very powerful lighting systems. Always take care when operating. Do not look directly
into the light. This may cause serious injury. Do not shine directly at others. Exposure Lights / Ultimate
Sports Engineering Ltd. accept no liability for any injuries or other damages arising from the use of their
product in any circumstances.
We are here to help.
If you are experiencing any problems with your ACR Float-On or accessories please contact our Technical
Service Department at: (954) 981-3333 | service@acrartex.com
Check web for additional product details and downloads: www.acrartex.com
SWITCH ON
SWITCH OFF
STROBE
RUNTIME (HOURS)
PRESS AND HOLD THE BUTTON FOR 2 SECONDS
PRESS AND HOLD THE BUTTON FOR 2 SECOND
PRESS AND HOLD THE BUTTON FOR 10 SECONDS
LED COLOUR
1.5
4
12
20
1440
ACTION
DOUBLE PRESS THE BUTTON
SINGLE PRESS THE BUTTON
GREEN
AMBER
RED
RED FLASH
BATTERY %
100 - 50
50 - 25
25 - 5
5 - EMPTY