Operating The Device - Axion STIM-PRO I-2000 Anleitung

AXION

OPERATING THE DEVICE

Turn on the device.
Press and hold the On/Off button for a long time to turn the
device on. During the application, you can pause and restart
EN
the application by briefly pressing this key.
Program selection, start of stimulation
In program mode you can choose between 5 different
programs. These are fully programmed - just set the
current intensity and start the treatment.
The program starts immediately when the intensity is set!
The programs run in continuous operation, recognizable by
the "C" in the display. Press the buttons
a program (P1 – P5).
TIP: For optimal treatment success, use the programs
P1 to P5 alternately on a daily basis. Thus, the pelvic floor is
stimulated optimally and there is no habituation effect.
After you have selected the desired program, please adjust
the intensity from 0-99 until a noticeable muscle contrac-
tion occurs.
Increase intensity
Decrease intensity
22
or to select