Hookup And Installation - Belkin PF30 Benutzerhandbuch

Hookup and Installation

Step 1
Mounting your Power Console (Optional)
The Belkin Power Console can be mounted to a standard AV equipment
rack or inside a cabinet equipped with an equipment rack.
A. R emove the mounting brackets from the box.
B. M ake sure that the Power Console is unplugged.
C. A lign the bracket with the front of the Power Console for flush
installation in the rack.
D. A ttach the bracket to the side of the Power Console (Fig. 1). You
must use a minimum of four screws to mount each bracket.
E. R epeat steps C and D for installation of the bracket to the other
side of the Power Console.
F. M ount the Power Console to the equipment rack.
Note: S crews for mounting the Power Console to the equipment rack
are not provided as they are made specifically for the particular
equipment rack that you own. Contact the manufacturer of the
rack if you do not have the correct mounting screws.
Fig. 1
6