Initial Installation - Carlett Lett460 Handbuch

Initial installation

In order to use the product properly, we advise
you to read and closely follow the assembly
steps that appear below.
1) Manually unfold the chassis until the base
opens. To do this, unlock the safety catch.
2) Press the side buttons on the handle to unfold
and separate from the chassis.
Image 1. Brake installation
are located in the furthermost rear position of the
chassis. In this way you will know the axle has
not been installed the wrong way round. Check
the diagram in order to ensure installation has
been correctly carried out. (see image no. 1)
4) To attach the bag:
22
3) To install the
brake, use the foot
buttons to install the
axle through the
trolley's two rear
vertical bars.
IMPORTANT: It is
essential to check
that the foot buttons
4.1)
usin
4.2)
via t
(one
4.3)
the
5) In or
insert th
ends of
clicking
6) To at
button o
axle. Ap
noise, w
correctly
Once c
ready to
Lett46
A trolley
Manufac
and ver
partner.