Caterlite CR912 Bedienungsanleitung Seite 4

UK
Installation
1. Remove the appliance from the packaging. Make sure that all protective plastic film and coatings are
thoroughly removed from all surfaces.
2. Maintain a distance of 20cm (7 inches) between the unit and walls or other objects for ventilation.
Before first time use:
• Let the appliance run at the highest temperature (300°C) for 5 minutes to
burn off any manufacturing residues.
• After cooling down, clean the interior and the 2 removable trays with soapy
water.
Operation
Timer knob
Thermostat knob
Power switch with
indicator light
1. Insert the baking tray then close the door. Ensure the crumb tray is in place.
2. Connect the appliance to the mains power supply.
3. Set the thermostat to the desired temperature.
4. Turning on: Set the power switch to "I" (on position). The indicator light illuminates indicating the
appliance begins to heat up.
5. The indicator light goes out when the set temperature is reached. Pull the baking tray to put food
then push back into place.
6. Set the timer knob to the desired baking time. The time can be adjusted during the baking process.
• During use, the indicator light keeps on and off constantly, indicating the set
temperature is kept.
• The timer is just a reminder. Even after it returns to OFF, the appliance is
still running.
7. Turning off: Set the thermostat to "0" and power switch to "O" consecutively. Then disconnect from
the power supply.
4
CR912_ML_A5_v1_20180416.indb 4
Baking tray
Heating
element
Crumb
tray
2018/4/16 17:46