Ovislink AirLive WN-300USB Schnellinstallationsanleitung Seite 9

Connect to Wireless Access Point
Using Configuration Utility to Connect to Wireless Access Point
1. After installation is complete, wireless
configuration utility will be shown as an icon at
the lower-right corner of your windows desktop.
Please click the icon by right mouse key, and
select Launch Config Utilities.
2. Configuration utility will scan for wireless
access points automatically, and all found
access points will be displayed. Please
select an access point you wish to connect,
and click Connect.
If the wireless access point you want to connect
does not show here, please click Rescan.
3. You'll be prompted to input the SSID (the name
of wireless access point) if the SSID of the
access point you want to connect is hidden,
then click OK.
The SSID you input here must be identical to the
SSID setting of the wireless access point you want to
connect.
WN-300USB
English
7