Basic Operations; Switching Power On/ Off; Adjusting The Volume - Kenwood TK-2312 Bedienungsanleitung

SWITCHING POWER ON/ OFF

Turn the Power switch/ Volume control clockwise to switch the
transceiver ON.
• A beep sounds and the display momentarily lights up.
• If the Transceiver Password function is programmed, "PASSWORD"
appears on the display. Enter the password to unlock the
transceiver (refer to "Transceiver Password", below).
Turn the Power switch/ Volume control counterclockwise to
switch the transceiver OFF.
■ Transceiver Password
If your transceiver is password protected, you must fi rst
enter the password before you can use the transceiver.
1 Rotate the Selector to select the fi rst digit of the
password.
2 Press the C> key to accept the entry and move to the
next digit.
• Press the A key to delete an incorrect digit.
3 Repeat steps 1 and 2 to enter the entire password.
• The password can contain a maximum of 6 digits.
4 Press the S key to confi rm the entered password.
• If you enter an incorrect password, an error tone sounds
and the transceiver remains locked.

ADJUSTING THE VOLUME

Rotate the Power switch/ Volume control to adjust the volume.
Clockwise increases the volume and counterclockwise
decreases it.
• You may need to adjust the volume more precisely while
communicating with other parties.
Note: If your dealer programmed [Squelch Off] or [Squelch
Off Momentary] onto a PF key, you can use that key to hear
background noise while adjusting the volume level.

BASIC OPERATIONS

11