Bluetooth Memory - Ebode BTS21 Bedienungsanleitung

C. Technical Specifications
Bluetooth Version:
Operation Frequency:
Supported Bluetooth Profiles:
Supported Codec:
Operating Range:
*Walls, steel, electrical wiring, WiFi, high power output devices and structures may affect
range of device.
**Refer to your Bluetooth device (notebook, PC, or mobile device ) manufacturer's
documentation / website for supported profiles.
1 Compatible with PC (Windows XP / Vista / 7 / 8). Apple Macintoshes equipped with
Bluetooth wireless stereo.
2 Compatible with most major brands of Bluetooth A2DP enabled mobile phones.
D. Compatibility Disclaimer
Wireless performance is dependent on your device's Bluetooth wireless technology. Refer
to your device manufacturer's manual. Manufacturers will not be liable for any lost of data
or leakages resulting from the use of these devices.

10. Bluetooth Memory

Connected Bluetooth devices would be able to re-connect to the BTS21 when the BTS21 is
powered ON and not connected to any device.
Note: The BTS21 is able to remember up to 8 paired devices in its memory bank,
eliminating the need to re-pair again should any of these devices connect to the BTS21.
Should a 9th device be paired to the BTS21, the 1st device will be erased from the BTS21
memory banks. At any one time a maximum memory of 8 devices are being retained.
A. Toggle between last two connected Bluetooth devices
you can toggle between devices to enjoy your favourite music from another paired
Bluetooth device by following these steps to establish connection: Press the Bluetooth
connect button (9) once, the LED indicator goes off and blinks at every 2 second interval
and the next device is ready to stream music.
Note: Ensure your next paired device's Bluetooth feature is on and ready to accept
connections.
B. Return to default setting
you can return the BTS21 to default settings and erase its memory of paired devices by
following these steps.
Press and hold the Bluetooth button for 8 seconds while the speaker is ON, after a long
beep tone is heard LED Status Indicator blinks rapidly and the memory cleared. The BTS21
is back in "pairing mode" and ready to accept new connection from Bluetooth devices.
26-3-2013
Bluetooth 2.1+EDR (Enhanced Data Rate)
2402-2480 MHz
A2DP**, AVRCP**
SBC
Up to 10 meters, measured in open space*
8 ebode BTS21