Application; Maintenance; Versions; Spare Parts - Beyerdynamic DT 790 Produktinformation

DT 790 / DT 797 – Headsets

4. Application

The headband can be set to each head size via the adjustable yokes. The
pivoting gooseneck microphone allows wearing the microphone from the
left or right ear.
The microphone should be positioned to the side of the mouth about
20 – 30 mm forward. This will keep it within the direct sound path, but
out of breath stream and therefore minimising any "pop" sounds.

5. Maintenance

As with any equipment which will be used in close proximity to sensitive
parts of the body, it is essential that the ear pads, the headband and the
microphone pop shield are kept clean. Use a soft, damp cloth for
cleaning the ear pads and headband using only gentle cleansing agents
(such as washing-up liquid). Take care not to allow any water drops into
the transducer elements and do not use any solvent cleaners.
As ear pads can wear out due to effects of skin moisture, cosmetics and
mechanical strains while wearing the headphones, you will need to
replace them from time to time.
If you use an additional pop shield for the microphone, you can wash it
in warm water. Please make sure that the pop shield is completely dry
when it is replaced.
The headset design allows easy servicing, because all parts can be
replaced.

6. Versions

DT 790.00 80 ohms, cable 1.5 m (4.92 ft),
bare ends . . . . . . . . . . . . . . . . . . . . . Order # 488.747
DT 790.28 80 ohms, cable 1.5 m (4.92 ft),
4-pin female XLR connector . . . . . . . Order # 488.755
DT 797 PV 250 ohms, cable 1.5 m (4.92 ft),
with 3-pin male XLR connector
and 6.35 mm stereo jack (1/4"). . . . . Order # 497.894

7. Spare Parts

BN 59-53/D Headband pad . . . . . . . . . . . . . . . . . Order # 590.681
EDT 770 S Ear pads, leatherette. . . . . . . . . . . . . Order # 904.783
WS 97 AZ Wind shield, charcoal-grey. . . . . . . . . Order # 465.313

8. Optional Accessories

EDT 770 V Ear pads, velours . . . . . . . . . . . . . . . Order # 926.660
11