Cleaning And Maintenance - Termozeta Komoda Gebrauchsanweisung

CLEANING AND MAINTENANCE

We recommend cleaning the vacuum cleaner after each use.
HOW TO EMPTY THE DUST/LIQUID COLLECTION CONTAINER
1. Hold the vacuum cleaner in a vertical position, so that
the input hole is facing downward. A different positioning
of the device may cause the vacuumed material to spill
when removing the container (2).
2. Press the container release (4) and remove the collection
container (2) from the body (7) (Fig. 2) of the appliance.
3. Remove the fi lter unit (3) inside the dust/liquid collection
container (2) (Fig. 3) and empty the vacuumed material.
4. Clean the fi lter, drying any residual fl uids before replacing
it in the collection container (2). To do this, refer to the
section "WASHING THE FILTER".
5. Reassemble the dust/liquid collection container (2) in
the appliance body (7), making sure that the release is
not pressed.
WASHING THE FILTER
1. Remove the fi lter unit (3) inside the dust/liquid collection
container (2).
2. Remove the dirt and dust from the plastic part using
water and allow to dry naturally (Fig. 4).
3. Lightly tap the cloth fi lter, or use a brush, to remove
small residues. If the fi lter is very dirty, use warm water
and soap for cleaning.
4. Only when all the components are completely dry,
reassemble the fi lter unit (3) and the dust/liquid collection
container (2) and put it into the body of the appliance (7).
ATTENTION!
- To clean the accessories, use warm water and a regular dishwashing detergent;
thoroughly dry them before storage.
- Never immerse the appliance in water or other liquids.
- Do not wash the vacuum cleaner under running water.
- Do not use chemicals or abrasives.
ENGLISH
Fig 2
7
Fig 3
3
Fig 4
3
4
2