Settings - Kingston Technology MobileLite Wireless Benutzerhandbuch

Settings and Configuring MobileLite Wireless
Using the MobileLite Wireless App, you can customize the wireless network settings for MobileLite Wireless. The
default settings are: Device Name: MobileLite Wireless, Visibility Status: ON, Wireless Channel: 11, and
Security: None.
To access MobileLite Wireless's Network Settings, please follow these steps:
1. Select the Kingston MLW icon on your Android phone or tablet.
2. Select the Device Name link, i.e. MobileLite Wireless (192.168.200.254).
3. Tap on the 'more options' button and select 'settings'.
Note: Settings is broken up into three sections, General, Connection
Settings, and Network Connection.
Figure 10.1 – Display under 'General'
Figure 10.2 – 'Connection Settings' display
1
If the visibility status has been turned off, you can still join the MobileLite Wireless network by entering the SSID manually on your Android
phone or tablet, as long as you know the 'Device Name'. Please note that a password will be required if the security option is enabled.
Document No. 480-14FUM-001.A00
General
Name: This is the SSID name that appears in the list
of available wireless networks on your mobile device.
Battery: Battery life indicator.
Firmware:
Wireless.
Version: Current MLW app version.
Connection Settings
Visible: Controls whether or not the SSID name will
broadcast in the list of available wireless networks.
Channel:
Wireless is currently using.
WPA2 Security: Controls whether or not users will
be prompted for a password when joining the
MobileLite Wireless network. The default setting is
'None'.
Kingston MobileLite Wireless
Current firmware version of MobileLite
The wireless channel that MobileLite
Page 10 of 12