Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Assembly of highboards
(example)
Erect the carcasses and adjust them. Insert the treaded sleeves into the inner side panels and join the
3.
carcasses with the screws M4x15mm.
If neccessary also use the Spax-screws 3,5x30mm.
4.
Join the base and the carcass with the Spax screws 4x60mm from below. The top is joined to the
carcass from inside with the same Spax screws.
S2
S2
S2
S2
M1
M1
S2
RW1
RW1
M1
M1
S2
S2
S2
Seite 2 / 2
Werbung
