ASSEMBLY
1. Screw the ground spike firmly into the post that houses the light fixture.
2. Put the light into the ground. If the ground is hard, we recommend softening it up
before putting the light in. Check that the light is firmly in place.
3. Connect the light to the Belys transformer or another Belys product wich is connected
to Belys transformer. Check that the plug is correctly installed and that the cable does
not move.
1
TECNICHAL DATA
Voltage
12 V
Power
1.8 W
Safety class
III
IP code
IP 44
RIGHT OF COMPLAINT
By law the product must be returned to the place of purchase along with the original
receipt in the event of a complaint. The user is liable for any damage to the product that
is caused by not using the product for its intended purpose or by not following this user
manual correctly. The right of complaint will not apply in these instances.
INFORMATION ABOUT HAZARDOUS WASTE
Used products should be handled separately from
household waste. They should be taken for recycling in
accordance with local rules for waste management.
2
3
AC12V
3