nedis CSWL140CBK Handbuch Seite 3

System
Date / Time
Language
Record Mode
Format SD/USB
Storage for Recording
Display Items
TV System
System Information
System Update
Scan Mode Period
Mute
Load Default
Brightness
Volume
Alarm Volume
Power Saving Mode
Record
Timer Recording
Motion Detection
PIR Recording
Playback
Recordings are stored in a separate folder for each date
In each folder the different cameras and timeslots are divided in subfolders
Quick previews of all recordings are shown which can be played or deleted.
Camera
Pairing
Activation
Image Setting
Alarm
Motion Detection / PIR
Detection
CSWL140CBK_MAN_ COMP_1218.indd 3
Sets the system time and date.
Sets the system language.
Sets to stop recording or overwrite the earliest video record when the
storage medium is full.
Sets whether to format the storage medium.
Selects the storage medium.
Sets whether to display RSSI, SD/USB Status and Camera on the screen
and the recorded video.
Select a TV system for the external AV connection: NTSC / PAL
Shows the system information
For software upgrade.
Sets the cyclic display interval of monitoring picture on the camera.
Turns on/off the speaker on the receiver.
Sets whether to restore default settings.
Adjusts brightness of the LCD screen.
Adjusts the camera's sound volume
Adjusts the alarm volume (if triggered recording and alarm are set)
Sets how quickly the receiver's display is switched off to save battery and gives the option to have the receiver
wake up on motion (independent on recording or alarm settings)
Set the recording start/stop time.
Recording will be triggered when a camera's image sensor detects movement.
Sensitivity and the target area can both be set.Useful when recording through a window or if only movement
in a specific area needs to trigger recording.
Recording will be triggered when a camera's PIR motion sensor detects movement.
To pair additional cameras (SAS-TRCAMxx) to the receiver select one of 4 channels and press OK.
Next press and hold the pair button on the camera.
Each camera can be switched on/off separately.
For each camera, the resolution and quality can be set.
To switch on the audio signal triggered by visual movement make sure motion detection /
PIR recording is activated in the recording menu and the alarm volume is set in the system settings.
Mute the alarm by using the AV button.
13-12-2018 11:36:58