Inhaltsverzeichnis
Werbung
reference. The original instructions were written in the Hungarian language.
This appliance may only be used by persons with impaired physical, sensory or mental capabilities, or lacking in
experience or knowledge, as well as children from the age of 8, if they are under supervision or have been given
instruction concerning use of the appliance by a person responsible for their safety and they have understood the
hazards associated with use. Children should not be allowed to play with the unit. Children may only clean or perform user
maintenance on the appliance under supervision.
• world first, the newest technology • outstandingly high sensitivity • paper thin, featherweight antenna • ideal for receiving
radio and TV broadcasts • can be used to receive both analog and digital signals • tabletop stand included • can be stuck on
furniture on walls • power supply: 12V
SETUP
1. Carefully rotate it around and push the two support rods into the base. Only one position is appropriate. Place the antenna into the
opening of the two support rods.
2. Connect the wire of the network adapter to the black box, then the adapter to the network.
3. Connect the antenna plug into the receiver device (television, radio, set top box...). Turn the device on and tune the programs.
4. By changing the position of the antenna, find the optimal receiving place.
• If your receiver device is capable of supplying the antenna through its cable with power, then the antenna can be operated without the
network adapter. It is forbidden to use both power supply methods at the same time!
• The device can only be separated from the network by unplugging power cable from the mains!
PLACEMENT
The quality of reception is greatly influenced by the placement of the antenna. Do not place it in the immediate vicinity of electronic
devices, or larger metal objects, because those can deteriorate the reception! Search for the ideal position. If you do not wish to use the
included base, it can be fixed on clean, smooth surfaces with the use of double sided adhesives.
CLEANING AND MAINTENANCE
Occasionally check the stable contact of connectors! The stains form the casing can be removed by using a slightly humid cloth. Dry cloth
may scratch the surface! Do not use aggressive chemicals!
WARNINGS
• If you notice any abnormalities, or if the network adapter is damaged, immediately cut the power from the device, and contact a
specialist!
• Never connect the adapter to the network with a wet, moist hand!
• If not in use for a prolonged period cut the power by unplugging the network adapter.
• Only usable indoor, under dry circumstances!
• Protect from dust, humidity, sunshine, and direct heat!
• Due to continuous development, the technical data and design can change without prior notice.
We do not take responsibility for the possible printing errors, and are sorry if any occurs.
dvb-t/t2 indoor antenna with signal amplifier
Before using the product for the first time, please read the instructions for use below and retain them for later
network adapter, included • can also be supplied from the receiver device (5V
EN
FZ 52
)
Werbung
Inhaltsverzeichnis
