Swiss Peak P326.76X Kurzanleitung Seite 4

CHARGING:
Connect the speaker to the USB charging cable to charge.
A full charge is approximately 2-3 hours and plays continuously for 6 hours.
Red light means it is charging, blue light means the battery is fully charged.
-Low battery: light slowly flashing red.
TURNING ON AND PARING:
Press power button long and hold the power button until indicator light will
flashing Blue.
Activate your paring device's BT feature. Search for "Swiss Peak", and select it to
connect.
- Press and hold the power button for 2 seconds to enter the pairing mode, Red
and Blue LED indicator light will flash.
MAINTENANCE:
- Turn off when not using to avoid accidental dialing.
- Do not let headphones exposed in liquid or moist condition.
- Do not expose the headphone in fires, which will cause explosion.
- Place in a dry atmosphere when not using for a long period.
- To maximize performance of the battery, fully charge the headphone after
unused for a month.
SPECIFICATIONS:
1. BT Version: V4.2.
2. BT distance : 10 meter
3. Playing time: 6 hours
4. Battery capacity: 135mAh
5. Working voltage : 3.7V
6. Charging time: 2-3hours
4