Cocraft 40-7818 Bedienungsanleitung

Tool Cabinet
Art.no 40-7818
Please read the entire instruction manual before using
the product and save it for future reference. We reserve
the right for any errors in text or images and any neces-
sary changes made to technical data. If you have any
questions regarding technical problems please contact
Customer Services.
Safety
• Do not use the side handles to lift the cabinet using
rope, chains or similar. If the cabinet is too heavy to lift
by hand, use a pallet truck/fork lift and lift the cabinet
from below.
• Do not drag the cabinet around by the handle; push it
in front of you.
• The swivel castors and the handle must be fitted on
the same side.
• Always use the brakes when the cabinet is stationary.
• Only open one drawer at a time, heavy drawers can tip
the cabinet over.
• Do not hang heavy items on the cabinet; doing so
could make it instable.
• Do not fasten the cabinet to moveable objects
or vehicles.
• Do not tow the cabinet behind vehicles or other
moveable objects, it can tip over.
• Do not stand on the open drawers or on top of
the cabinet.
• The total weight contained in a drawer should not
exceed 22.5 kg.
• The total weight of the entire cabinet and contents
must not exceed 450 kg.
• Do not use the cabinet on uneven floors or gradients,
it might tip over or start moving.
Product description
Tool cabinet with 4 wheels (two with brakes) and
7 lockable drawers.
Size: 69 × 46 × 85 cm (w × d × h).
Assembly
Side handle
Attach the handle with
the included bolts. Tighten
the bolts properly, but do
not overtighten them.
GREAT BRITAIN • CUSTOMER SERVICE
tel. 0845 300 9799 web: www.clasohlson.co.uk
e-mail: customerservice@clasohlson.co.uk
Wheels
The wheels and bolts are in the bottom drawer.
Check the contents:
• 4 wheels; 2 swivel castors with brakes and 2 fixed
without brakes.
• 16 bolts
Fix the wheels to the base making
sure that the swivel wheels are on
the same side as the handle.
Tighten the bolts properly, but do not
overtighten them.
Removing and inserting drawers
1. Empty the drawer that is to be removed.
2. Slide it all the way out.
3. Press the left side plastic tab up and the right side tab
down and hold them there whilst pulling the drawer
out.
4. Insert the drawer
by slotting it into
the drawer slide and
pushing it all the way in.
Locking
1. Close all the drawers.
2. There is a little resistance in the drawers when they are
all the way in. Push the drawers in so that they are all
right the way to the back of the cabinet.
3. Turn the key.
4. Check that all the drawers are locked.
Care and maintenance
• Polish the paintwork with car wax to protect it from
wear and tear.
• Clean the cabinet using a clean soft cloth and a little
detergent. Never clean the product using solvents or
flammable liquids.
• Regularly lubricate the drawer slides and wheels with
grease and the lock with oil.
Disposal
Follow local ordinances when disposing of this product.
If you are unsure of how to dispose of this product,
please contact your local authority.